联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
雕刻机经常断刀怎么办?
来源：http://www.jmycnc.com 时间：2022-02-14
如今越来越多的人开始使用雕刻机，很多人总是会出现雕刻机断刀的情况，很多人都不知道这是怎么回事，今天我们就来告诉大家答案！
Nowadays, more and more people begin to use engraving machines. Many people always break the knife of engraving machines. Many people don't know what's going on. Today we'll tell you the answer!
雕刻机经常遇到断刀的情况，其实这并不一定是石雕所存在的问题，建议对不同情况下，有一个相应的解决方案会更好。导致断刀发生的原因有好几种，主要是下面几种问题引起，可以尽量避免或者采取相应的措施来解决。
Engraving machines often encounter knife breakage. In fact, this is not necessarily the problem of stone carving. It is suggested that it would be better to have a corresponding solution for different situations. There are several reasons for tool breakage, mainly caused by the following problems, which can be avoided or solved by taking corresponding measures.
1.雕刻机本身的问题。在雕刻机进行操作时，若雕刻机安装不正确，或卡头内有杂物，将导致工具不垂直，将造成断刀，所以安装工具时要仔细检查雕刻机安装是否正确。
1. Problems of engraving machine itself. During the operation of the engraving machine, if the engraving machine is installed incorrectly or there are sundries in the chuck, the tool will not be vertical and the knife will be broken. Therefore, carefully check whether the engraving machine is installed correctly when installing the tool.
2.根据加工物料选择相应的刀具。这个道理很容易理解，比如说木材与翡翠的硬度差太大，木工刀是无法用来雕刻翡翠的，而像水晶、绿松石、软玉、硬玉等，很多材料的硬度是有差别的，所以要选择合适材料的刀具进行加工。
2. Select the corresponding tool according to the processing materials. This reason is easy to understand. For example, the hardness difference between wood and jadeite is too large, and woodworking knives cannot be used to carve jadeite. For example, the hardness of many materials, such as crystal, turquoise, nephrite, jadeite, etc., is different, so it is necessary to select appropriate knives for processing.
3.加工速度太快。对每一种材料的硬度不同，而且刀具的耐受性一定也有一定的限制，如果加工速度过快也会造成断刀现象，因此在加工过程中要根据实际情况调整速度，避免过快。
3. The processing speed is too fast. The hardness of each material is different, and the tolerance of the tool must be limited. If the processing speed is too fast, it will also cause tool breakage. Therefore, the speed should be adjusted according to the actual situation in the processing process to avoid too fast.
4.刀道间隙太大，下刀速度太快。同样地，对加工速度的理解是，加工时刀距过大或刀片速度过快，都有可能超出刀具承受范围而造成断刀。
4. The clearance of knife path is too large and the cutting speed is too fast. Similarly, the understanding of machining speed is that if the tool distance is too large or the blade speed is too fast, it may exceed the bearing range of the tool and cause tool breakage.
5.高度差异过大。同一种刀具路径的高低差过大，如超过刀具的承受力范围，都会引起断刀情况。
5. The height difference is too large. If the height difference of the same tool path is too large, if it exceeds the bearing range of the tool, it will cause tool breakage.
以上就是雕刻机会出现断刀的几个原因，希望大家在使用设备时一定要注意哦！
The above are the reasons for the broken knife in the carving opportunity. I hope you must pay attention to it when using the equipment!
本文由五轴保丽龙雕刻机为您提供，我们的网站是：http://www.jmycnc.com/我们将以全心全意的热情为您提供服务，欢迎您的访问
This article is provided by the five axis poly dragon engraving machine. Our website is: http://www.jmycnc.com/ We will provide you with services with wholehearted enthusiasm. Welcome to visit
- 上一篇：为什么说木工雕刻机七分用三分养
- 下一篇：石材雕刻机要不定时加水的原因是什么？
