联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
小型数控石材雕刻机断刀的原因
来源：http://www.jmycnc.com 时间：2022-04-14
小型数控石材雕刻机不再局限于工作室或加工车间，它已进入许多家庭，成为许多业余石雕爱好者的秘密武器。
Small CNC stone carving machine is no longer limited to studios or processing workshops. It has entered many families and become a secret weapon for many amateur stone carving enthusiasts.
正常情况下，我们在雕刻石头时会遇到断刀，但这种情况不一定是石材雕刻机的问题，建议了解不同断刀情况的相应解决方案，断刀的原因有几个，主要是由以下问题引起的，可以尽量避免或采取相应措施解决。
Under normal circumstances, we will encounter knife breaking when carving stone, but this situation is not necessarily a problem of stone carving machine. It is suggested to understand the corresponding solutions to different knife breaking situations. There are several reasons for knife breaking, which are mainly caused by the following problems, which can be avoided or solved by taking corresponding measures as far as possible.
（1）刀具安装问题。如果刀具安装不正确，或夹头内有杂物，导致刀具不垂直，刀具断裂，因此，在安装刀具时，需要仔细检查刀具安装是否正确。
(1) Tool installation problem. If the tool is not installed correctly or there are sundries in the collet, resulting in the tool is not vertical and the tool is broken, therefore, when installing the tool, it is necessary to carefully check whether the tool is installed correctly.
（2）为加工材料选择相应的刀具。这很容易理解，例如，木材和翡翠之间存在很大的硬度差距，木工刀不能用来雕刻翡翠，但许多材料的硬度不同，如水晶、绿松石、软玉、硬玉等，因此应选择合适材料的石材雕刻机刀具进行加工。
(2) Select the appropriate tool for the machining material. This is easy to understand. For example, there is a large hardness gap between wood and jadeite. Woodworking knives cannot be used to carve jadeite, but the hardness of many materials is different, such as crystal, turquoise, nephrite, jadeite, etc. Therefore, stone carving machine knives with appropriate materials should be selected for processing.
（3）加工速度太快。我们说每种材料的硬度不同，刀具的承载能力一定是有限，如果加工速度设置过快，也可能导致断刀，因此，应根据实际情况调整加工速度，避免过快。
(3) Processing speed is too fast. We say that the hardness of each material is different, and the bearing capacity of the tool must be limited. If the processing speed is set too fast, it may also lead to tool breakage. Therefore, the processing speed should be adjusted according to the actual situation to avoid too fast.
（4）石材雕刻机的刀路间距过大或下刀速度过快。与加工速度相同，加工刀路间距过大或下刀速度过快也可能超出刀具的承载范围，导致断刀。
(4) The knife path spacing of stone carving machine is too large or the cutting speed is too fast. The same as the machining speed, too large distance between machining paths or too fast cutting speed may also exceed the bearing range of the tool, resulting in tool breakage.
（5）高度差太大。同一道路的高度差太大，如果超出刀具的承载范围，也会导致断刀。
(5) The height difference is too large. The height difference of the same road is too large. If it exceeds the bearing range of the tool, it will also lead to tool breakage.
无论是工作室还是家用的小型数控石材雕刻机，如果遇到断刀，都需要先分析这些问题，然后找出解决方案。
Whether it is a small CNC stone carving machine in the studio or at home, if it encounters a broken knife, it is necessary to analyze these problems first, and then find a solution.
以上就是为大家介绍的有关保丽龙雕刻机的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jmycnc.com/
The above is a detailed introduction to the poly dragon engraving machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.jmycnc.com/
- 上一篇：使用四工序开料机加工板式家具的好处
- 下一篇：为什么要定期检查雕刻机刀具的磨损情况？
