联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
石材雕刻机要不定时加水的原因是什么？
来源：http://www.jmycnc.com 时间：2022-02-18
在加工金属、石材等硬质材料的时候，我们经常会看到数控雕刻机加工过程中会不定时的加水，这是为什么呢？今天小编就给大家分析一下。
When processing metal, stone and other hard materials, we often see that water will be added from time to time during the processing of NC engraving machine. Why? Today, Xiaobian will analyze it for you.
石材雕刻机在工作过程中需要连接电源，电源在机器上进行流通的时候，必然会产生热量。主轴在长时间通电工作的情况下，可能会温度过高，进而我们需要用水对其进行一定的冷却。
The stone carving machine needs to be connected to the power supply in the working process. When the power supply circulates on the machine, it will inevitably produce heat. When the spindle is powered on for a long time, the temperature may be too high, so we need to cool it with water.
在另一个方面就是，相对于石材雕刻机要雕刻的石材来说的，如果石材过硬的话，刀头在长期雕刻之后，同样会过热，所以刀头也需要水冷。
On the other hand, compared with the stone to be carved by the stone carving machine, if the stone is excellent, the cutter head will also overheat after long-term carving, so the cutter head also needs water cooling.
石材雕刻机和墓碑雕刻机都需要这也的双冷却，因为如果没有用水进行一定的冷却，让机器通电干烧，会对机器本身造成严重的损害。
Both stone carving machine and tombstone carving machine need this kind of double cooling, because if there is no water for certain cooling and the machine is powered on for dry burning, it will cause serious damage to the machine itself.
那么在石材雕刻机工作的过程中，容易出问题的就是主轴，主轴干烧会导致主轴发热过度，一旦发热过度就有可能将主轴烧掉。主轴一旦烧掉，就要把其返厂维修。那么这个周期一般是一到两个周左右。一到两个周的时间进行维修，肯定会延误客户订单。
In the process of stone carving machine working, the main shaft is prone to problems. Dry burning of the main shaft will lead to excessive heating of the main shaft. Once the heating is excessive, it is possible to burn the main shaft. Once the spindle is burned, it should be returned to the factory for maintenance. So this cycle is usually about one to two weeks. One to two weeks of repair will certainly delay the customer's order.
综上所述，在操作机器进行加工工作的时候，一定要合理的进行操作机器，保证机器的正常使用的基础上，提高生产效率，延长机器的使用寿命
To sum up, when operating the machine for processing, we must operate the machine reasonably to improve the production efficiency and prolong the service life of the machine on the basis of ensuring the normal use of the machine
石材雕刻机进行乱刻的一个方面，也可能是石材雕刻机主轴过热导致的。如果不对主轴进行通水冷却，那么主轴就会出现抖动或者错位，一会儿快，一会儿慢，并且有些不稳定。
One aspect of the random engraving of the stone engraving machine may also be caused by the overheating of the main shaft of the stone engraving machine. If the main shaft is not cooled by water, the main shaft will shake or dislocation, which will be fast and slow for a while, and some instability.
本文由石材雕刻机为您提供，我们的网站是：http://www.jmycnc.com/我们将以全心全意的热情为您提供服务，欢迎您的访问
This article is provided by stone carving machine. Our website is: http://www.jmycnc.com/ We will provide you with services with wholehearted enthusiasm. Welcome to visit
- 上一篇：雕刻机经常断刀怎么办?
- 下一篇：家具厂应该怎么选择适合自己的数控开料机？
