联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
为什么要定期检查雕刻机刀具的磨损情况
来源：http://www.jmycnc.com 时间：2022-01-24
在日常生产过程中，雕刻机操作人员应严格按照操作规程使用机器，控制雕刻机的操作技能，尤其是雕刻用户更应重视这个问题。雕刻机对雕刻精度的影响比较大。如果雕刻机的雕刻结果因人为因素模糊，损失不值得。
In the daily production process, the engraving machine operators should use the machine in strict accordance with the operating procedures and control the operating skills of the engraving machine, especially the engraving users should pay more attention to this problem. Engraving machine has a great influence on engraving accuracy. If the engraving result of the engraving machine is blurred due to human factors, the loss is not worth it.
如果不清楚雕刻机是否进入工件，还需要检查雕刻机的雕刻路径是否有问题。实际操作中积累的经验有很大的相关性。雕刻效果要选择什么样的刀具和雕刻深等。这些问题需要雕刻机操作人员在实际操作中操作和理解。
If it is not clear whether the engraving machine enters the workpiece, it is also necessary to check whether there is a problem with the engraving path of the engraving machine. The experience accumulated in practical operation is of great relevance. What kind of tool and engraving depth should be selected for engraving effect. These problems need to be operated and understood by engraving machine operators in practical operation.
要检查雕刻机机架带动的木工能不能有废料；机架上没有碎片，雕刻机主轴上可以有缝隙，也会造成雕刻机雕刻效果模糊。还需要检查雕刻机主轴的润滑效果，以免雕刻机半停或卡死。
Check whether the woodworking driven by the engraving machine frame can have waste; There are no fragments on the frame, and there can be gaps on the main shaft of the engraving machine, which will also cause the engraving effect of the engraving machine to be blurred. It is also necessary to check the lubrication effect of the main shaft of the engraving machine to avoid half stop or jamming of the engraving machine.
我们要保持雕刻机干净整洁，养成每次雕刻机完成后停下来清洗的好习惯，对机器本身是很好的保护。
We should keep the engraving machine clean and tidy, and form the good habit of stopping and cleaning after each engraving machine is completed, which is a good protection for the machine itself.
还有要定期检查雕刻机刀具的磨损情况，及时提出相应的解决方案(更换或修理)。如果雕刻机的刀具在磨损情况下不更换，雕刻工件的尺寸就会模糊。雕刻机的刀具要及时更换，新的刀具要及时更换，防止使用刀具造成雕刻后果。
In addition, we should regularly check the wear of engraving machine tools and put forward corresponding solutions (replacement or repair) in time. If the cutter of the engraving machine is not replaced under wear, the size of the engraving workpiece will be blurred. The cutting tools of the engraving machine shall be replaced in time, and the new cutting tools shall be replaced in time to prevent the engraving consequences caused by the use of cutting tools.
本文由保丽龙雕刻机为您提供，我们的网站是：http://www.jmycnc.com/我们将以全心全意的热情为您提供服务，欢迎您的访问
This article is provided by Baolilong engraving machine. Our website is: http://www.jmycnc.com/ We will serve you with wholehearted enthusiasm. Welcome to visit
- 上一篇：数控开料机如何合理保养提高家具生产效率
- 下一篇：为什么说木工雕刻机七分用三分养
