导致雕刻机主轴损坏的4种原因？

来源：http://www.jmycnc.com 时间：2021-03-06 

雕刻机主轴是雕刻机开机必运行的一个主要配件，也是不可或缺的重要配件之一。雕刻机主轴在使用过程中容易损坏，产生故障的原因有很多，

Engraving machine spindle is a main accessory of engraving machine, and it is also one of the indispensable important accessories. The main shaft of engraving machine is easy to be damaged in the process of use. There are many reasons for failure,

今天我们主要来说说以下4个原因。

Today we mainly talk about the following four reasons.

1、雕刻机主轴的质量问题。   也就是说主轴本身质量不过关导致了轴承的损坏。用的是质量很差的轴承，在雕刻机主轴高速运转的时候寿命变短，容易损坏也就容易解释了。

1. Quality problem of engraving machine spindle. That is to say, the quality of the spindle itself is not up to standard, leading to the damage of the bearing. The bearing is of poor quality. When the engraving machine spindle is running at high speed, its service life becomes shorter and it is easy to be damaged.

2、雕刻主轴冷却系统没有效果。   雕刻机主轴水冷的都有水循环系统，如果长期水循环不好，或者忘了开水循环，时间一长，就会出现热涨效应，导致摩擦增大，造成了轴承的损坏。

2. Engraving spindle cooling system has no effect. Engraving machine spindle water cooling has water circulation system, if the long-term water circulation is not good, or forget the boiling water circulation, a long time, there will be thermal expansion effect, resulting in increased friction, resulting in the damage of the bearing.

3、和雕刻机具体操作有关系。   有的主轴转速还没有达到就开始雕刻，容易造成轴承的损坏，有的客户在雕刻的时候雕刻材料阻力大小不一样，没有及时调整速度，损坏了雕刻机主轴。

3. It has something to do with the specific operation of engraving machine. Some of the spindle speed has not reached the start of carving, easy to cause damage to the bearing, some customers in carving carving material resistance size is not the same, did not adjust the speed in time, finally damaged the carving machine spindle.

4、水冷主轴未做好防冻措施。   冬天一定要注意这点，水在寒冬冻结导致管道破裂的事情屡见不鲜，雕刻机主轴也是会被冻伤的。

4. Antifreezing measures were not taken for water-cooled spindle. We must pay attention to this point in winter. It is not uncommon for water to freeze in winter, which leads to pipe rupture. The main shaft of engraving machine will also be frostbitten.

注意事项： 主轴注意防冻、 定期检查水循环冷却装置.

Precautions: pay attention to antifreeze spindle, regularly check the water circulation cooling device

• 上一篇：介绍五个要点助你选购木工雕刻机
• 下一篇：泡沫雕刻机的铸造工艺特点

相关产品：
• 
  木工雕刻机
• 
  1325木工雕刻机独...
• 
  1325木工雕刻机
• 
  1325木工镂空花格...
• 
  1225型平雕圆雕一...

相关新闻：
• 
  激光雕刻机和机械雕刻...
• 
  三轴雕刻机无心外圆磨...
• 
  石材雕刻机断刀的原...
• 
  数控开料机会受到什么...
• 
  泡沫雕刻机日常井盖如...