The standard stone engraving machine and tombstone engraving machine are double cooled. On the one hand, because the stone material is hard, the water-cooled cutter head should be used when working. On the other hand, the water cools the spindle to prevent the spindle temperature from being too high and play a certain role in protecting the spindle. However, if the customer doesn't pay attention or doesn't follow the training steps, there will be no water and dry burning, which will cause serious damage to the machine itself.

石材雕刻机主轴干烧容易导致的就是主轴发热过度,温度过高导致烧掉。一般主轴烧掉后,就得需要把坏的返厂维修。然后修好再从工厂发回来,这样一来一回的周期大约1周左右,会严重耽误正常加工工期，如果客户那边着急要订单的话，会造成很大的损失。所以说客户在加工的时候，一定要按照工厂技术员的培训操作，保证机器的正常使用，延长机器的适用周期。

The dry burning of the spindle of stone carving machine is easy to lead to excessive heating of the spindle and burning out due to too high temperature. The spindle needs to be returned to the factory for repair. Then repair it and send it back from the factory. This cycle is about 1 week, which will seriously delay the normal processing period. If the customer is anxious to order, it will cause great losses. Therefore, when processing, customers must operate according to the training of factory technicians to ensure the normal use of the machine and prolong the application cycle of the machine.

二，如果石材雕刻机的主轴没有通水冷却,就会一直处于持续高温发热状态。容易导致主轴出现抖动或者错位,雕刻忽快忽慢,不稳定的现象。一方面会使精度会受到影响，另一方面主轴错位会使得雕刻样品错位，雕刻出的样品自然漏洞百出,非常不精细。

2、 If the main shaft of the stone carving machine is not cooled by water, it will always be in a state of continuous high temperature heating. It is easy to cause shaking or dislocation of the main shaft, fast and slow engraving and instability. On the one hand, the accuracy will be affected. On the other hand, the dislocation of the main shaft will cause the dislocation of the carved samples. The carved samples are naturally full of holes and are very not fine.

以上就是为大家介绍的有关3050保丽龙雕刻机的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jmycnc.com/

The above is the detailed introduction of 3050 styrofoam engraving machine. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.jmycnc.com/