Wood carving machine is mainly used for wood processing, making it more beautiful. At present, there are many kinds of woodworking engraving machines on the market, and the quality and price of products are also uneven. Therefore, you need to choose carefully when you choose to buy them. Here are five main points to help you choose woodworking engraving machines.

一看木工雕刻机幅面的大小。客户应根据业务的需求和资金状况，选择适合自己的雕刻机的型号及其功率的大小。一般小幅面的雕刻机有600mm×600mm和600mm×900mm，进料宽度是700mm。雕刻双色板是小幅面雕刻机基本的应用，接纳性很好。再小一点的雕刻机与其相差不多，但雕刻双色板时要裁板，比较麻烦而且造成不必要的浪费。

A look at the size of woodworking engraving machine format. Customers should choose their own engraving machine model and power according to the business needs and financial situation. Generally, small format engraving machines have 600mm × 600mm and 600mm × 900mm, and the feeding width is 700mm. Engraving two color board is the basic application of small format engraving machine, which has good acceptability. The price of a smaller engraving machine is not much different from it, but it is troublesome and unnecessary to cut the two-color board when engraving.

大幅面的雕刻机有1200mm×1200mm、200mm×1500mm、1500mm×2400mm、2400mm×3000mm，以上机型的雕刻机进料宽度都超过1350mm，现在市面上的有机玻璃和PVC板的尺寸都是1300mm×2400mm，所以这几款机型对需求大幅面雕刻机的客户比较适合。

There are 1200mm × 1200mm, 200mm × 1500mm, 1500mm × 2400mm and 2400mm × 3000mm engraving machines with large format. The feeding width of the engraving machines of the above models is more than 1350mm. The sizes of plexiglass and PVC plates on the market are 1300mm × 2400mm, so these models are more suitable for customers who need large format engraving machines.

二要注意雕刻机的主轴电机。主轴电机是电脑雕刻机的重要组成部件，其性能对电脑雕刻机整机的性能有着关重要的影响。加工主轴通常分为两类：主轴和大功率切断主轴。

Second, we should pay attention to the engraving machine spindle motor. Spindle motor is an important component of computer engraving machine, its performance has a crucial impact on the performance of computer engraving machine. Machining spindle is usually divided into two categories: spindle and high power cut-off spindle.

1、精细加工主轴的特点是低噪音、高转速、高度，适合加工特别精细的工件，如印章、铭牌、胸牌礼品等。此类电机通常为高速变频电机，功率较小，般在250W以下。缺点是切断厚的材料的能力较差，不合切断较厚的材料。

1. Fine processing spindle is characterized by low noise, high speed, high height, suitable for processing particularly fine workpieces, such as seals, nameplates, badges, gifts and so on. This kind of motor is usually high-speed variable frequency motor, the power is small, generally below 250W. The disadvantage is that the ability of cutting thick material is poor, which is not suitable for cutting thick material.

2、大功率切断主轴，主要用于切断、大功率刻，特点是功率大，切割能力强，特别适合割宇、三立体字，当然也可以制作胸牌、铭牌、印章等。此类大功率主轴根据电机的特性一般可分为无刷高速交流电机和有刷交流电机。

2. The high-power cutting spindle is mainly used for cutting and high-power engraving. It is characterized by high power and strong cutting ability. It is especially suitable for cutting Yu and three-dimensional characters. Of course, it can also be used to make badges, nameplates, seals, etc. This kind of high-power spindle can be divided into brushless high-speed AC motor and brushless AC motor according to the characteristics of motor.

三是雕刻机控制方式和速度的选择：

The third is the choice of control mode and speed of engraving machine

控制方式现在可分为三种：A、所有的运算工作有电脑控制完成，雕刻机在工作时电脑处于工作状态，无法进行其它的排版工作，这样可能因电脑的误操作而造成废品。B、采用单片机的控制，这种控制器可以在雕刻机工作的同时进行排版，但不能关闭电脑，这实际上相当于节余一台电脑，并减少了电脑的误操作而造成的废品。C、采用USB口传输数据，系统有着32M以上的内存容量。只要保存完文件，就可以马上完全脱离电脑、关闭电脑或进行其它排版。这种方式大大提高了雕刻机的工作效率。

Now the control mode can be divided into three kinds: A. all the calculation work is controlled by computer. When the engraving machine is working, the computer is in the working state and can not carry out other typesetting work, which may cause waste products due to the wrong operation of the computer. B. With the control of single chip microcomputer, this controller can set the typesetting while the engraving machine is working, but it can't turn off the computer, which is equivalent to saving a computer and reducing the waste products caused by the wrong operation of the computer. C. Using USB port to transfer data, the system has more than 32m memory capacity. As long as the file is saved, you can immediately get off the computer, shut down the computer or do other typesetting. This way greatly improves the working efficiency of the engraving machine.

四要注意其导轨。大幅面雕刻机一定要采用加宽的进口的方型导轨，其负载能力和精度保持能力是圆型导轨的30倍以上，保证了雕刻机的高质高速。

Fourth, pay attention to the guide rail. The large format engraving machine must adopt the widened square guide rail. Its load capacity and accuracy retention capacity are more than 30 times of the circular guide rail, which ensures the high quality and high speed of the engraving machine.