保丽龙雕刻机教你如何控制雕刻效果模糊的情况

来源：http://www.jmycnc.com 时间：2020-11-30 

要保持好雕刻机的整洁，在每次雕刻机加工实现后要养成停机清理的好习性，这对机器本身就是一种很好的保护，雕刻机操作人员在日常生产工作过程中要标严格按照操作规则来使用机器，控制雕刻机的操作技巧。

First of all, we should keep the engraving machine clean and tidy. After each engraving machine is processed, we should develop a good habit of stopping and cleaning. This is a good protection for the machine itself. The carving machine operator should use the machine strictly according to the operation rules in the daily production process, and control the operation skills of the engraving machine.

特别是做雕刻的客户更应当注重这方面的问题。 雕刻机对雕刻的精度都要求比较高，假如雕刻机由于人为的因素出现问题而导致雕刻后果模糊那就得不偿失了。

In particular, carving customers should pay more attention to this issue. Engraving machine on the accuracy of engraving are relatively high, if the engraving machine due to human factors caused by problems caused by carving fuzzy, it is not worth the loss.

其次，要常常检查雕刻机刀具的磨损状态，及时作出相应解决（更换或者修复）。假如雕刻机的刀具到了磨损较大的状态还未改换，会导致雕刻进去的工件模糊不清尺寸不一，雕刻机的刀具到了须要改换的时候要及时交换新的刀具，防止由于刀具的起因形成雕刻后果不行，报废材料。

Secondly, often check the engraving machine tool wear status, timely make the corresponding solution (replacement or repair). If the cutting tool of engraving machine has not been changed when it is worn out, it will cause the workpiece to be engraved blurred and the size is different. When the tool of engraving machine needs to be changed, it is necessary to exchange the new tool in time to prevent the engraving consequence caused by the cutter and report the waste material.

另外，假如雕刻机雕刻进去的工件不清楚，还须要检查一下雕刻机的雕刻路径是否存在问题，这种状态在实际操作工作常积攒经历有很大的关联，哪种雕刻效果应当选择哪一种刀具，雕刻的深度在多少等等。这些问题都需求雕刻机操作员在实际中去操作和理解。

In addition, if the engraving machine engraving into the workpiece is not clear, it is also necessary to check whether there is a problem in the engraving path of the engraving machine. This state often accumulates experience in actual operation, which carving effect should be selected which kind of cutter, the depth of engraving and so on. These problems require engraving machine operators to operate and understand in practice.

检查一下雕刻机齿条传动的木工机上能否有残留杂物；齿条上有没有杂物，雕刻机主轴能否有空隙，这些状态也会都会引起雕刻机雕刻后果模糊的状态。还需要检查雕刻机主轴的润滑效果避免雕刻机运行到一半停住或卡死

Check whether there are residual debris on the woodworking machine driven by the rack of engraving machine; whether there are impurities on the rack and whether there is a gap in the main shaft of the engraving machine. These conditions will also cause the engraving machine to have fuzzy carving consequences. It is also necessary to check the lubrication effect of the engraving machine spindle, so as to avoid the engraving machine running to half stop or stuck

• 上一篇：玉石雕刻机该如何进行保养？
• 下一篇：四工序开料机和是四工序雕刻机是一种设备吗？

相关产品：
• 
  木工雕刻机
• 
  1325木工雕刻机独...
• 
  1325木工雕刻机
• 
  1325木工镂空花格...
• 
  1225型平雕圆雕一...

相关新闻：
• 
  激光雕刻机和机械雕刻...
• 
  三轴雕刻机无心外圆磨...
• 
  石材雕刻机断刀的原...
• 
  数控开料机会受到什么...
• 
  泡沫雕刻机日常井盖如...