联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
业内资讯
为什么石材雕刻机在雕刻的时候要加水？
来源：http://www.jmycnc.com 时间：2022-02-09
那麽在石材雕刻机工作中的全过程中，非常容易出难题的就是说主轴轴承，主轴轴承干烧会造成主轴轴承发烫过多，一旦发烫过多就会有将会将主轴轴承烧毁。主轴轴承一旦烧毁，还要把其返修检修。那麽这一周期时间一般是一到2个周上下。一到2个周的时间开展检修，毫无疑问会耽误销售订单。
In the whole process of the stone carving machine, it is very easy to have problems, that is, the main shaft bearing. The dry burning of the main shaft bearing will cause the main shaft bearing to burn too much. Once it is too hot, it will burn the main shaft bearing. Once the main shaft bearing is burned, it should be repaired and repaired. Then the cycle time is usually about one to two weeks. One to two weeks of maintenance will undoubtedly delay the sales order.
总的来说，在实际操作设备开展生产加工工作中的情况下，一定要开展实际操作设备，确保设备的一切正常应用的基本上，提升生产率，增加设备的使用期。
Generally speaking, when the actual operation equipment is used for production and processing, the actual operation equipment must be carried out to ensure the normal application of the equipment, improve the productivity and increase the service life of the equipment.
石材雕刻机开展乱刻的一个层面，也将会是石材雕刻机主轴轴承超温造成的。假如错误主轴轴承开展通冷却水，那麽主轴轴承就会出现颤动或是移位，一会儿快，一会儿慢，而且一些不平稳。
One aspect of random engraving of stone engraving machine will also be caused by overheating of main shaft bearing of stone engraving machine. If the main shaft bearing is wrongly connected with cooling water, the main shaft bearing will vibrate or shift, which will be fast, slow and unstable.
以上就是3050雕刻机http://www.jmycnc.com/为大家介绍的内容，感谢您在百忙之中查看我公司的信息内容，如果您想要了解的更多，欢迎您来电进行咨询!
The above is the 3050 engraving machine http://www.jmycnc.com/ Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to inquire!
- 上一篇：雕刻机怎样确定主轴转速？
- 下一篇：保丽龙雕刻机的性价比高
