联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
石材雕刻机电磁信号出现问题怎么解决？
来源：http://www.jmycnc.com 时间：2021-06-23
在我们使用石材雕刻机的时候，我们要对石材雕刻机有一个大致的了解，这样我们在使用的过程中才能更好地将其优势发挥出来，保障设备的正常运行。那么当石材雕刻机电磁信号出现问题时，我们就要及时地进行解决，那么下面我们就来看一下吧。
When we use the stone carving machine, we should have a general understanding of the stone carving machine, so that we can give full play to its advantages in the process of using, and ensure the normal operation of the equipment. So when the stone carving machine electromagnetic signal problems, we have to solve in time, then let's take a look at it.
1、安装电源滤波器以减少交流电源的污染。
1. Install power filter to reduce AC power pollution.
2、是“一点接地”原则。在接地电源滤波器驱动器PE和DIR-短路引线驱动电机和电缆保护盖之间的电气接地线之后的控制脉冲PULSE-脉冲的方向需要与驱动线底盘壁屏蔽杆良好接触。
2. It is the principle of "one point grounding". The direction of the control pulse after the electrical ground wire between the grounding power filter driver PE and the dir short-circuit lead driving motor and the cable protection cover needs to be in good contact with the shield rod of the chassis wall of the driving line.
3、增加控制线与电源线和电机驱动线之间的距离，细分交叉。例如，当在两轴驱动系统的同一机架中处理两个驱动器安装位置时，一个驱动器铭牌面向前，另一个驱动器铭牌朝向，并且将这些结构布置得较短。
3. Increase the distance between the control line and the power line and the motor drive line, subdivide and cross. For example, when handling two drive mounting positions in the same rack of a two axis drive system, one drive nameplate faces forward and the other faces, and these structures are arranged shorter.
4、我们使用盾牌来缓解外界的干扰或对外部的自我干扰。
4. We use shields to mitigate external interference or self-interference.
我们大概了解了这几点应对的方式，那么我们就要在出现这种情况时及时地进行解决，这样才能更好地将设备的使用优势发挥出来，也能更好地保障生产效率。那么大家在选择石材雕刻机的时候，面对这样的问题发生时，可以来墨源数控看一下，其在木工雕刻机，石材雕刻机等上面都是做的不错的，受到了广客户的信赖和喜欢，欢迎前来了解。
We have a general understanding of the ways to deal with these points, so we need to solve this situation in time, so as to better play out the advantages of the use of equipment, and better guarantee the production efficiency. So when you choose stone carving machine, in the face of such problems, you can come to Moyuan CNC to have a look. It has done a good job in woodworking carving machine, stone carving machine, etc., and has been trusted and liked by many customers. Welcome to know.
- 上一篇：如何通过雕刻机主轴电机声音判断故障
- 下一篇：雕刻机的干扰问题怎么解决？
