联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
业内资讯
保丽龙雕刻机的速度慢是什么原因？
来源：http://www.jmycnc.com 时间：2021-04-22
近几年来使用保丽龙雕刻机的用户越来越多，很多用户选择雕刻机行业作为起家创业，因此很多用户是刚开始起家做雕刻机行业，所以对雕刻机的选择也很谨慎，比如雕刻机的雕刻精度、速度、范围包括售后服务等方面很小心谨慎。那么雕刻机的雕刻速度慢是什么原因导致的呢?
In recent years, there are more and more users using styrofoam engraving machine. Many users choose engraving machine industry as their starting business. Therefore, many users are just starting to do engraving machine industry, so they are very cautious about the choice of engraving machine, such as engraving precision, speed, range, including after-sales service, etc. So what is the reason for the slow carving speed of the engraving machine?
一、机器的配置
1、 Machine configuration
机器自身的配置是导致雕刻机速度慢的原因之一，如果雕刻机的电机功率自身就小，是不可能把雕刻速度调高的，因为根本是带不起来的！
First of all, the configuration of the machine itself is one of the reasons for the slow speed of the engraving machine. If the motor power of the engraving machine itself is small, it is impossible to increase the engraving speed, because it can't be brought up at all!
二、基本的理论
2、 Basic theory
操作人员一定要从理论工作开始培训，一定要在理论考核通过的情况下进行机器操作，只有对机器有了充分的了解才能更好地操作机器设置。
Operators must start training from theoretical work and operate the machine after passing the theoretical examination. Only when they have a full understanding of the machine can they operate the machine better.
三、刀具的培训
3、 Tool training
必须进行刀具的培训，操作员必须要对常见刀具、雕刻机电机转速、行进速度等知识必须要了解清楚，要完全掌握刀具的应用在操作机器。
It is necessary to carry out the training of cutting tools. The operator must have a clear understanding of the common cutting tools, motor speed of engraving machine, traveling speed and other knowledge, and fully master the application of cutting tools in the operation of the machine.
四、加工材料的应用
4、 Application of processing materials
操作员必须要熟悉各种不同的加工材料，不一样的材料、不一样的厚度、成品大小不一样等，必须要掌握每一种材料的雕刻方式以及雕刻速度。
Operators must be familiar with different processing materials, different materials, different thicknesses, different sizes of finished products, etc. they must master the carving method and carving speed of each material.
五、操作软件
5、 Operation software
要把以上培训掌握之后在进行软件的培训，软件的培训主要集中在用户应用的领域。软件的要求为：软件的各种排版、各种的操作、路径的生成、能迅速找出路径的错误等。
After mastering the above training, we should carry out software training, which mainly focuses on the application field of users. The requirements of the software are: all kinds of typesetting, all kinds of operation, the generation of path, the ability to quickly find out the path error, etc.
六、雕刻的速度
6、 The speed of carving
雕刻速度的快慢会影响雕刻精度，对雕刻精度要求的越高，雕刻速度就不能太快，速度过快，床身就会晃动从而会影响精度。
The speed of engraving will affect the accuracy of engraving. The higher the accuracy of engraving, the faster the engraving speed can not be. If the speed is too fast, the bed will shake, which will affect the accuracy.
- 上一篇：玉石雕刻机的标准配置是什么?
- 下一篇：石材雕刻刀坏的原因有一下几点?
