雕刻机产生雕刻不圆滑的原因是什么？

来源：http://www.jmycnc.com 时间：2021-01-11 

对于保丽龙雕刻机雕刻不圆滑的原因及解决技巧，我们一起去了解一下。下面把引起雕刻机雕刻不圆滑的原因和解决方法进行总结分析，希望对于大家有所帮助。

For engraving machine engraving is not smooth reasons and solutions, we go to understand. The following causes of engraving machine engraving is not smooth reasons and solutions are summarized and analyzed, I hope to help you.

相对于小编分析出来的原因一个就是动作会比较大，二是原因如雕刻机是圆轨的就要想方法换导轨或滑块。

Compared with Xiaobian analysis, one of the reasons is that the action will be relatively large, and the other is that if the engraving machine is a circular track, we need to find a way to change the guide or slider.

视原因而定。如是方轨就简单许多只需调整上下或前后滑块即可。雕刻机刻字不圆滑以我所知道的来说可能有两方面的原因引起：

It depends on the reason. If it's a square track, it's much simpler. Just adjust the up and down or front and rear sliders. As far as I know, there may be two reasons for the unsmooth engraving of engraving machine

原因1、雕刻机直线速度与曲线速度相差太大导致雕刻机在走曲线时震动过大使雕刻路径出现偏差而出现刻字不圆滑。

Reason 1, engraving machine linear speed and curve speed difference is too big, resulting in engraving machine in walking curve vibration too much, resulting in carving path deviation and appear not smooth.

解决方法：则要更改直线或曲线速度，更改值以雕刻机自身参数而定。

Solution: to change the speed of straight line or curve, the change value depends on the engraving machine's own parameters.

原因2、雕刻机y轴或x轴出现间隙也可能两轴同时有间隙，导致雕刻过程中晃动使雕刻路径出现偏差引起刻字不圆滑。

Reason 2: there may be a gap between the y-axis or x-axis of the engraving machine, or there may be a gap between the two axes at the same time, which leads to the shaking in the engraving process and the deviation of the engraving path, resulting in the unsmooth engraving.

解决方法：因如雕刻机是圆轨的就要想办法换导轨或滑块，动作会比较大，视原因而定。如是方轨就简单许多只需调整上下或前后滑块即可。

Solution: if the engraving machine is a round rail, we should find a way to change the guide rail or slider, the action will be larger, depending on the reason. If it's a square track, it's much simpler. Just adjust the up and down or front and rear sliders.

经过上面解释雕刻机雕刻不圆滑的原因及解决技巧。相信大家可以让雕刻机稳定工作。广大购买雕刻机的朋友在使用过程中如遇困难可随时联系墨源在线客服：http://www.jmycnc.com

After the above explanation, the reason why the engraving machine is not smooth and the solution skills. I believe you can make the engraving machine work stably. The majority of friends who buy engraving machines can contact Moyuan online customer service at any time if they encounter difficulties in using them http://www.jmycnc.com

• 上一篇：雕刻机使用前后需要做哪些工作？
• 下一篇：玉石雕刻机的标准配置是什么?

相关产品：
• 
  木工雕刻机
• 
  1325木工雕刻机独...
• 
  1325木工雕刻机
• 
  1325木工镂空花格...
• 
  1225型平雕圆雕一...

相关新闻：
• 
  激光雕刻机和机械雕刻...
• 
  三轴雕刻机无心外圆磨...
• 
  石材雕刻机断刀的原...
• 
  数控开料机会受到什么...
• 
  泡沫雕刻机日常井盖如...