联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
如何应对解决雕刻机工作时的灰尘？
来源：http://www.jmycnc.com 时间：2020-12-29
随着雕刻机的发展，它的应用也越来越广泛，以单一的手工作业已经慢慢的转向自动化作业。但是，在雕刻机加工过程中一个重要的问题一直困扰着厂家和用户，在雕刻加工过程中会产生很大的灰尘，虽然目前大多数保丽龙雕刻机都配有吸尘装置，但是其没有根本上解决灰尘的问题，下面墨渊雕刻机产生的灰尘应对问题进行分析：
With the development of engraving machine, its application is more and more widely, with a single manual operation has slowly turned to automatic operation. However, an important problem in the process of engraving machine has been puzzling manufacturers and users. A lot of dust will be produced in the process of engraving. Although most of styrofoam engraving machines are equipped with dust suction device, it does not fundamentally solve the problem of dust. The dust generated by the lower surface of Moyuan engraving machine should be analyzed
很多的用户在用保丽龙雕刻机的时候，如果没有防尘或者是没有吸尘会给机器和人带来危害，粉尘污染，要走综合治理的路线，从生产设备入手，选用合理的数控开料机设备，辅以一定的防尘、除尘措施。
Many users in the use of styrofoam engraving machine, if there is no dust or no dust will bring harm to the machine and people, to eliminate dust pollution, we should take the route of comprehensive treatment, starting from the production equipment, choose reasonable CNC cutting machine equipment, supplemented by certain dust prevention, dust removal measures.
但在当前条件下，还是选择除尘设备，除尘设备的选择要考虑操作现场所要求的净化程度和粉尘的性质等方面。
But in the current conditions, or choose the dust removal equipment, dust removal equipment selection to consider the operation site required by the degree of purification and the nature of dust and other aspects.
对于大型木尘及中型木尘可以现场及时收集，而对于各种细型木尘，传统有用的办法是采用气力集尘装置或布袋吸尘设备来收集。如果没有安装，可在机床本身附加单机吸尘和集尘装置，也能起到较好的效果。为了起见，操作工人要佩戴防护眼镜及防尘口罩，以保护眼睛和呼吸器官，在产生细型木尘的机床上操作的工人，应戴大型口罩，防止粉尘侵害。
For large and medium-sized wood dust, it can be collected on site in time, while for various fine wood dust, the traditional and useful method is to use pneumatic dust collector or bag dust collector. If not installed, the machine itself can be attached to a single dust suction and dust collection device, can also play a better effect. For the sake of safety, operators should wear protective glasses and dust masks to protect their eyes and respiratory organs. Workers operating on machine tools producing fine wood dust should wear large masks to prevent dust invasion.
