随着雕刻行业的不断发展，雕刻机被需要的越来越多，使用就会有问题的产生，有些问题很简单。有些需要排查一下，问题应如何解决？今天墨渊的小编就跟大家一起来聊一聊保丽龙雕刻机的雕刻速度该如如何控制？
With the continuous development of engraving industry, engraving machine is needed more and more, there will be problems in use, some problems are very simple. Some need to be investigated. How should the problems be solved? Today, Moyuan's editor will talk with you about how to control the carving speed of styrofoam carving machine?
1、对于雕刻速度，石材雕刻机的进给速度和主轴的转速是不确定的。但是，刀具直径越大，转速要求越低。速度越快，转速要求越高，切割深度越大。它很慢，但不能高速和低速进给，因此很容易磨损工具；

1. For the engraving speed, the feed speed of the stone engraving machine and the rotation speed of the spindle are uncertain. However, the larger the tool diameter, the lower the speed requirement. The faster the speed, the higher the speed requirement, the greater the cutting depth. It is very slow, but it can not feed at high speed and low speed, so it is easy to wear tools;
2、对于石材雕刻机进行浮雕雕刻时，要考虑的是及时切割过程中出现的；在规划雕刻路径时，刀具的数量根据刀具半径和深度分层。
2. For stone engraving machine for relief carving, the first thing to consider is to clear the cutting process in time; when planning the carving path, the number of tools is layered according to the radius and depth of the tool.
3、数控石材雕刻机床选用钨钢刀比较多，到具有合金刀，有pcd的刀，雕刻石材吃刀量比较大，所以选用耐用的刀具比较好。
3. CNC stone carving machine tool selection tungsten steel knife is more, to have alloy knife, have PCD knife, carving stone cutting capacity is relatively large, so choose durable tool is better.
以上就是小编为大家介绍的关于保丽龙雕刻机控制速度的相关内容，如有任何疑问的可以点击：http://www.jmycnc.com会有在线客服
The above is about the control speed of styrofoam engraving machine. If you have any questions, you can click: http://www.jmycnc.com There will be online customer service
进行解答。
Answer.