Also known as the "Dragon carving machine" or "foam carving machine", as the foam plastic mold is used more and more widely, the demand for the CNC machine tool polystyrofoam machining center that can make the Dragon model is bigger and bigger. The conventional styrofoam engraving machines have models of 1322040, 2540, etc. due to the large overall size of the polylon machining center, high precision requirements, and great technical difficulties, there are few enterprises with the production capacity of styrofoam machining center.

一，我们要了解保丽龙加工主轴的性能和功能，雕刻机的主轴电机也是很关键的，因为雕刻主轴电机是长时间连续工作的，所以如果雕刻主轴电机不好会很影响雕刻机的使用，比如电脑雕刻机的使用。保丽龙雕刻机功率更小也要是7.5KW的。

1、 We need to understand the performance and function of the spindle of the styrofoam machining center. The spindle motor of the engraving machine is also very important. Because the carving spindle motor works continuously for a long time, if the engraving spindle motor is not good, it will affect the use of engraving machine, such as the use of computer engraving machine. Baolilong engraving machine power minimum also if 7.5kW.

二，就是雕刻主轴电机的速度可调范围，一般速度可调范围是每分钟几千到三万转，若速度不可调或速度可调范围较小，那么就说明该保丽龙雕刻机应用范围就受到很大的限制，因为雕刻不同的材料必须用不同的雕刻主轴转速。

2、 It is the speed adjustable range of engraving spindle motor. Generally, the speed adjustable range is thousands to 30000 revolutions per minute. If the speed is not adjustable or the speed adjustable range is small, then it means that the application range of the styrofoam engraving machine is greatly limited, because different materials for carving must use different carving spindle speed.

三，控制器一般也分为两类:一类控制器只是做驱动，而其所有运算工作由电脑来完成，在雕刻机工作时电脑处于等待状态，无法进行排版工作。另一类控制器采用单板机或单片机控制，这种控制器实际上就是一台电脑，所以只要保丽龙雕刻机一开始工作，电脑马上就可以进行其他排版工作，特别是较长时间雕刻时，该优势特别明显。

3、 The controller is generally divided into two types: one is only used for driving, and all the calculation work is completed by the computer. When the engraving machine is working, the computer is in a waiting state and cannot carry out typesetting. The other kind of controller is controlled by single board computer or single chip microcomputer. This kind of controller is actually a computer, so as long as the styrofoam carving machine starts to work, the computer can immediately carry out other typesetting work, especially when carving for a long time, this advantage is particularly obvious.

四，雕铣机床体制造工艺:大功率保丽龙雕刻机工作时要求床体一定要精密和稳定，所以，长期大功率雕刻应采用铸造本体才能保证其加工精度和稳定性。丝杆和导轨也是雕刻机的重要组成部分，好的丝杆和导轨是雕刻机长期使用时其精度和性能的保证。

4、 Engraving and milling machine body manufacturing process: the high-power Baolilong engraving machine must be precise and stable when it works. Therefore, the casting body should be used for long-term high-power engraving to ensure its machining accuracy and stability. The screw rod and guide rail are also important parts of engraving machine. Good screw rod and guide rail guarantee the accuracy and performance of engraving machine when it is used for a long time.

总而言之，保丽龙雕刻机与普通的木工雕刻机不同，不仅仅体现在配置方面。如果大家有机会，可以到工厂实地考察一下生产厂家生产加工实力以及配件使用情况。另外，有需要铸造木工雕刻机的朋友也可以联系哦。

In a word, styrofoam carving machine is different from ordinary woodworking carving machine, not only in terms of configuration. If you have the opportunity, you can go to the factory to investigate the production and processing strength of the manufacturer and the use of accessories. In addition, the need to cast wood carving machine friends can also contact oh.