How much is the price of a styrofoam engraving machine? This is one of the problems that many customers are very concerned about. In fact, the price of styrofoam engraving machine will be affected by many factors, such as power, beam, etc

保丽龙雕刻机的主要是由以下几种因素影响的：

The price of styrofoam engraving machine is mainly affected by the following factors:

1、雕刻机的功率大小。因为木材质的硬度比较大，一般来说木工雕刻机都需要配置功率大一些的主轴电机，功率越大，也会相应增加。

1. The power of engraving machine. Because the hardness of wood is relatively large, generally speaking, woodworking engraving machines need to be equipped with spindle motors with higher power. The higher the power, the higher the price will be.

2、雕刻机的横梁，市场上的雕刻机有的是用钢的，有的是用铝的，差别也很大。

2. The beam of engraving machine, the engraving machine on the market, some are made of steel, some are made of aluminum, the price difference is also very big.

保丽龙雕刻机

Styrofoam carving machine

3、从传动方式来说，雕刻机分为丝杆机和齿条机，齿条机的比丝杆机贵太多，丝杆机一般用在广告行业，做红木家具的也建议选择这种机型，而齿条机呢，传动速度比较快，一般用于切割，木门加工等等，并不是说齿条机不适合做广告行业，而是用齿条机做广告行业，性价比不大，有点大材小用。丝杆机三轴是丝杆传动，齿条机轴是齿条传动，齿条机是双驱动。

3. In terms of transmission mode, engraving machine is divided into screw rod machine and rack machine. The price of rack machine is much higher than that of screw rod machine. Screw rod machine is generally used in advertising industry, and mahogany furniture manufacturers also suggest choosing this type of machine. However, rack machine has a relatively fast transmission speed and is generally used for cutting and wood door processing. It is not said that rack machine is not suitable for advertising industry, but is widely used It's not cost-effective. It's a bit overkill. The three axis of screw machine is driven by screw rod, the shaft of rack machine is rack drive, and rack machine is double drive.

4、雕刻机的床身，主要分槽钢、方管、铸铁的三种，一般熟悉这种设备的都知道铸铁的床身好，其实如果方管的是加厚的话，成本比铸铁的还高，稳定性比铸铁的也好，需要具体分析。

4. Engraving machine bed, mainly divided into channel steel, square tube, cast iron three kinds, generally familiar with this equipment know that cast iron bed is good, in fact, if the square tube is thickened, the cost is higher than that of cast iron, and the stability is better than that of cast iron, which needs specific analysis.

5、如果同样是齿条机，差别也是很大，这就得从雕刻机的每个部件来对比，比如说主轴，一般分为水冷和风冷的，而且根据牌子的不同也不同。综上所述，石材雕刻机因企业、功率等方面的原因，会导致它的有很大区间的浮动。在选择的时候可以综合考虑各方面来挑选。

5. If the rack machine is the same, the price difference is also very big. This has to be compared from each part of the engraving machine. For example, the main shaft is generally divided into water-cooled and air-cooled, and the prices vary according to different brands. To sum up, stone carving machine due to brand, power and other reasons, will lead to its price has a large range of fluctuations. When choosing, we can consider all aspects to choose.