保丽龙雕刻机的操作拥有哪些功能？

来源：http://www.jmycnc.com 时间：2020-10-22 

使用过保丽龙雕刻机的用户应该都知道它的功能是非常的强大的，如果大家没有感受到它的功能的话那么应该是哪里出现了差错。不过对于很多没有使用过的人来说，保丽龙雕刻机的功能可能还不是很清楚，不如先看一看下面文章中的介绍吧。

Users who have used the styrofoam engraving machine should know that its function is very powerful. If you don't feel its function, then there should be something wrong. However, for many people who have not used it, the function of the styrofoam carving machine may not be very clear. It is better to take a look at the introduction in the following article.

我们在保丽龙雕刻机雕刻过程中出现的一些小问题，比如突然断电、定位不当、未设置路径、中途有事离开等问题，我们都可以通过模具雕刻机线路板来解决，保丽龙雕刻机也可以与断点续雕功能配合，继续雕刻。这样既省时省力，还能按时按质按量的完成。

We can solve some small problems in the engraving process of the styrofoam engraving machine, such as sudden power failure, improper positioning, no path setting and leaving on the way. We can solve these problems through the circuit board of the mold engraving machine. The styrofoam engraving machine can also cooperate with the breakpoint continuous carving function to continue carving. This not only saves time and effort, but also completes on time according to the quality and quantity.

1.断点续雕

1. Break point continuation

从任意百分比开始雕刻，保丽龙雕刻机到某一百分比结束。可以随时停止雕刻，下一次开机选择百分比继续雕刻。

Starting from any percentage of engraving, styrofoam engraving machine to a certain percentage of the end. You can stop engraving at any time and select the percentage to continue engraving next time.

2.虚拟加工

2. Virtual machining

根据设定的参数，虚拟显示实际加工过程。可以预先观察到加工效果，提前作出判断。

According to the set parameters, the virtual display of the actual processing process. The processing effect can be observed in advance and the judgment can be made in advance.

3.实时显示加工路径

Real time processing path display

加工前显示所有加工路径，在加工过程中实时显示当前位置。我们可以观察到实际雕刻情况，以方便我们作出正确的判断。

All machining paths are displayed before machining, and the current position is displayed in real time during machining. We can observe the actual carving situation to facilitate us to make a correct judgment.

4.自动关闭主轴

4. Turn off the spindle automatically

完成某项功能后自动关闭主轴。对于一些较大的线路板，若需要中途离开，可选择在完成后自动关闭主轴电机。

After completing a function, the spindle is automatically closed. For some large circuit boards, if you need to leave midway, you can choose to turn off the spindle motor automatically after completion.

5.自动原点定位

5. Automatic origin positioning

可以从任意位置自动回到设定的零点。可以在安装好敷铜板，调整好雕刻刀位置后，设定零点，以后无论经过怎样的操作，总能方便的回到加工位置。

It can automatically return to the set zero point from any position. You can set the zero point after installing the copper clad plate and adjusting the position of the engraving knife. No matter what kind of operation, you can always return to the processing position conveniently.

6.任意区域选择雕刻

6. Select carving in any area

选择任意区域，进行雕刻。若因为板面不平等因素，造成线路板部分区域雕刻不到位，可以使用此功能对某个区域重新雕刻。

Select any area to carve. If the engraving is not in place due to the uneven board surface, you can use this function to re carve a certain area.

7.组合雕刻

7. Combination carving

选择两把雕刻刀，自动分配雕刻区域。在不影响雕刻精度的情况下，选择一把大雕刻刀，快速铣掉大块的空白区域。

Select two engraving knives to assign engraving area automatically. In the case of not affecting the carving accuracy, select a large engraving knife to quickly mill out the large blank area.

8.定位孔与定位销

8. Locating hole and locating pin

提前打定位孔，重新安装时使用定位销，既保证精度，又方便安装。线路板取下后很难通过肉眼重新安装到位，采用定位销以后，重新安装会方便的多。配合自动原点定位功能使用，效果更好。

The positioning hole should be drilled in advance and the positioning pin should be used when re installing, which not only ensures the accuracy but also facilitates the installation. It is difficult to re install the circuit board in place by naked eyes after removing it. It will be more convenient to re install the circuit board after using the positioning pin. With the automatic origin positioning function, the effect is better.

这些内容都是对模具雕刻机功能的分享，希望大家在之后使用的过程中可以正确使用操作，如有问题可以咨询我们公司或者关注公司网站：http://www.jmycnc.com。

These contents are the sharing of the functions of the mold engraving machine. I hope you can use and operate correctly in the process of using. If you have any questions, you can consult our company or follow the company website: http://www.jmycnc.com 。
关键词：保丽龙雕刻机

• 上一篇：石材雕刻机厂家哪家好？
• 下一篇：保丽龙雕刻机常见的问题的解决方法

相关产品：
• 
  木工雕刻机
• 
  1325木工雕刻机独...
• 
  1325木工雕刻机
• 
  1325木工镂空花格...
• 
  1225型平雕圆雕一...

相关新闻：
• 
  激光雕刻机和机械雕刻...
• 
  三轴雕刻机无心外圆磨...
• 
  石材雕刻机断刀的原...
• 
  数控开料机会受到什么...
• 
  泡沫雕刻机日常井盖如...