联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
业内资讯
【知识分享】保丽龙雕刻机操作的方法与步骤
来源：http://www.jmycnc.com 时间：2020-09-29
1、排好版面，包括设置材料高度、大小、距离、行距等参数。同样内容的批量复制好。
1. First, arrange the layout, including setting the material height, size, distance, line spacing and other parameters. Copy the same content in batch.
2、然后设置走刀路径（2D,3D,割），选刀时根据字体的大小，线粗细程度来选择合适的刀具，走完路径后看一下字有没有没走刀的地方，有的话证明刀具设置大了或修一下文字。
2. Then set the tool path (2D, 3D, cutting). Select the appropriate tool according to the size of the font and the thickness of the line. After the path is completed, check whether there is any place where the tool has not been moved. If so, it can be proved that the tool setting is large or the text is modified.
不同深度的文字要走不同深度的路径，一般雕刻为2D选平底尖刀，切割割选直刀。为了加工出来的物品和设计的实际尺寸一致，更好提前设计一下刀具补偿，路径计算选择计算内外轮廓，宽度为选择刀具的一半，一般雕刻为内轮廓，切割为外轮廓，不保留原图 。
Different depth of text to take a different depth of path, generally carved for 2D flat bottomed sharp knife, cutting cut choose straight knife. In order to make the processed products consistent with the actual size of the design, it is better to design the tool compensation in advance, select the path calculation to calculate the internal and external contour, the width is half of the selected tool, generally carve as the inner contour, cut as the outer contour, without retaining the original drawing.
3、存储雕刻路径，不同深度的内容存储不同的文件，例如一个版面内既有雕刻又有切割，因为雕刻深度或所选用的刀具不同，必须存为两个路径文件。存完雕刻路径时必须删掉雕刻路径在作切割路径并存储路径（注意次安装完文泰需将此处的抬刀高度为３mm）。
3. The engraving path is stored. The contents of different depths are stored in different files. For example, there are both engraving and cutting in one layout. Because the engraving depth or the selected tool are different, two path files must be saved. When the engraving path is saved, the engraving path must be deleted and used as the cutting path and the path should be stored (note that the tool lifting height here should be 3mm after the first installation of Wentai).
4、打开运动管理系统。
4. Open the motion management system.
在自动点击右键选折打并装载打开在文泰中保存的要雕刻的路径，换上所选的刀具，在手动中将雕刻头移动到要雕刻的材料上定原点（在工作坐标X、Y、Z上点击），切割时一般先把刀具移动到材料的前面把Z轴和台面刚接触到后把Z轴定0后，在抬起Z轴把刀具移动到材料的左下角把X,Y在定0即可。。。
Right click the right button to select, fold and load to open the path to be engraved saved in Wentai, replace the selected tool, and manually move the engraving head to the material to be carved and set the origin (click on the working coordinates x, y, z). When cutting, generally move the cutter to the front of the material, just contact the Z axis with the table top, set the Z axis to 0, and then lift the Z axis to move the tool to the material Set X and y at 0 in the lower left corner of the material...
假设同一版面上既有雕刻还有切割需要更换刀具时雕刻完成后卸下雕刻刀具，换上切割刀具只要把Z轴重新定原点即可，X、Y坐标一定不能更改，否则切割和雕刻跟排版版面不吻合。（切割时注意把进给速度调慢，不同材料在调整以下主轴转速）。
Suppose that there are both engraving and cutting on the same layout, when the cutting tool needs to be replaced, the engraving tool will be removed after the engraving is completed, and the cutting tool can only be replaced by resetting the Z axis to the original point, and the X and Y coordinates must not be changed, otherwise the cutting and engraving are not consistent with the layout. (pay attention to slow down the feed speed when cutting, and adjust the spindle speed for different materials).
5、抬起主轴，移动龙门架到合适位置，加工完成。
5. Lift the spindle, move the gantry to the appropriate position, and finish the machining.
操作过程看似复杂难懂，其实1天就能学会，也要看个人的理解能力，这些都是雕刻机厂家服务范围内的，详情咨询雕刻机代理商或雕刻机厂家。
The operation process seems complicated and difficult to understand. In fact, it can be learned in one day, which depends on the individual's understanding ability. These are within the service scope of engraving machine manufacturer. Please consult engraving machine agent or engraving machine manufacturer for details.
以上就会说小编所说的关于保丽龙雕刻机操作的方法与步骤，希望可以帮助到大家，如有疑问可关注公司网站：http://www.jmycnc.com会有在线客服与您进行解答。
The above will talk about the operation methods and steps of styrofoam carving machine mentioned by Xiaobian. I hope it can help you. If you have any questions, please pay attention to the company's website: http://www.jmycnc.com There will be online customer service to answer with you.
- 上一篇：五轴保丽龙雕刻机速度怎么样？
- 下一篇：四轴保丽龙雕刻机如何进行保养维护？
