When using the stone carving machine, we must pay attention to its operation and working environment, because this can ensure that the work is carried out in a more appropriate state and avoid the failure of mechanical equipment. The environment of the workshop is still relatively humid, so the engraving machine is easy to rust when it is idle, which is not conducive to the production of mechanical equipment. Therefore, we must take some methods in our daily life and try our best to avoid it. Stone carving machine is a high-tech electromechanical equipment, which has certain requirements for the working environment.

1、避免使用强电源、强磁场等严重影响石材雕刻机信号传输的设备。如：焊机、发射塔等。

1. Avoid using strong power supply, strong magnetic field and other equipment that seriously affect the signal transmission of stone engraving machine. Such as welding machine, launching tower, etc.

2、使用三芯电源，保证雕刻机良好的接地效果（接地线），减少干扰。

2. Use three core power supply to ensure good grounding effect (grounding wire) of engraving machine and reduce interference.

3、要求电压稳定。如果可以用工业用电，尽量不要用民用用电，以免出现较大的波动。使用稳压器更好。

3. Voltage stability is required. If industrial power can be used, try not to use civil power to avoid large fluctuations. It is better to use a voltage regulator.

4、机器不能在强酸强碱环境中长期工作。以上几点是关于石材雕刻机使用的工作环境。对于这些环境，我们需要注意。因为我们以后使用石材雕刻机的时候，就可以在它的环境中工作了。

4. The machine cannot work in strong acid and alkali environment for a long time. The above points are about the working environment of stone carving machine. We need to pay attention to these environments. Because when we use the stone carving machine in the future, we can work in its environment.

5、钢制零件的表面，如滚珠丝杠、滚动导轨的淬硬钢滚道、钢制紧固件等，应每隔几天用布或蘸有黄油的棉花擦拭一次。对于其他部位，应经常观察是否有弱锈蚀。如果用抹布蘸油擦拭，将是今后防锈的重中之重。

5. The surface of steel parts, such as ball screw, hardened steel raceway of rolling guide rail, steel fasteners, etc., shall be wiped with cloth or cotton dipped in butter every few days. For other parts, always observe whether there is weak corrosion. If you wipe it with a rag dipped in oil, it will be the top priority of rust prevention in the future.

6、铝件表面也应每隔几天用布蘸黄油擦拭，或喷一层清漆。并经常观察是否有腐蚀现象。

6. The surface of aluminum parts shall also be wiped with cloth dipped in butter or sprayed with a layer of varnish every few days. And often observe whether there is corrosion.

7、冷却水箱加满乳化油，防止生锈，不要用清水。

7. Fill the cooling water tank with emulsified oil to prevent rust. Do not use clean water.

以上就是石材雕刻机在闲置时，一定要做好防护，以免生锈，影响机器设备的正常运行。那么，操作者在操作的时候，一定要进行维护保养，但是生锈的问题也要注意。

The above is that when the stone carving machine is idle, it must be protected to avoid rust and affect the normal operation of the machine and equipment. Then, the operator must carry out maintenance when operating, but pay attention to the problem of rust.

那么在选择石材雕刻机的时候，可以咨询雕刻机厂家，学习一些关于雕刻机的知识，对大家以后在使用的过程中很有帮助。选择石材雕刻机的时候，可以来了解一下，在这方面还是做得不错的，有丰富的生产经验。在产品方面，大家可以放心，因为它也是做了多年的厂家。因为后期制造商的资质会得到保障，其服务行业比较齐全。公司也在不断引进的生产技术和生产工艺，开发生产高品质、高性价比的数控设备，持续为客户创造更大的价值。

Then when choosing the stone carving machine, you can consult the carving machine manufacturer and learn some knowledge about the carving machine, which is very helpful for you in the process of using it in the future. When choosing stone carving machine, you can come to Jiabang CNC to understand. You are still doing well in this regard and have rich production experience. In terms of products, you can rest assured, because it has been a manufacturer for many years. Because the qualification of later manufacturers will be guaranteed, and its service industry is relatively complete. The company is also constantly introducing international advanced production technology and production technology, developing and producing high-quality and cost-effective CNC equipment, and continues to create greater value for customers.

以上就是今天带给大家的知识，石材雕刻机专注行业多年，为用户不断的提供有价值的内容，更多内容请继续关注我们：http://www.jmycnc.com/

The above is the knowledge brought to you today. Stone carving machine has been focused on the industry for many years and has continuously provided users with valuable content. Please continue to pay attention to us for more content: http://www.jmycnc.com/