联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
业内资讯
玉石雕刻机的散热原理是什么？
来源：http://www.jmycnc.com 时间：2022-02-21
玉石雕刻机随着使用功率的增加，在发热散热问题中也存在一定的问题，常用的散热方法是水冷散热，这种散热方式的原理小编来为大家解答一下吧!
With the increase of power, the jade carving machine also has some problems in heating and heat dissipation. The common heat dissipation method is water cooling. The principle of this heat dissipation method is compiled to answer for you!
玉石雕刻机在工作的过程中，会产生热量，设备自身会发热，如果温度过高不进行处理的话对设备也会有很大的影响，而且用电也会加热，温度同样会升高。
In the process of working, the jade carving machine will generate heat, and the equipment itself will generate heat. If the temperature is too high, it will also have a great impact on the equipment, and the electricity will also be heated, and the temperature will also rise.
电机过热也会产生一些负效应，在散热方面可能有些人选择将机器停用一段时间，没那么热了再继续工作，这样其实也是一种办法，还可以在电机内部加热辐射，以保证及时散发出热量。
Overheating of the motor will also produce some negative effects. In terms of heat dissipation, some people may choose to stop the machine for a period of time and continue to work when it is not so hot. In fact, this is also a way. It can also heat radiation inside the motor to ensure timely heat emission.
玉石雕刻机散热的原理
Heat dissipation principle of jade carving machine
被动散热和风冷散热都是散热的方式，使用环境温度与设备的温差通过自然冷却，这样成本比较低，比较适合小型、短时间作业的玉石雕刻机设备。
Passive heat dissipation and air-cooled heat dissipation are both ways of heat dissipation. Using the temperature difference between the ambient temperature and the equipment through natural cooling, the cost is relatively low and is more suitable for small and short-time jade carving machine equipment.
目前使用空气冷却散热方式的比较多，可以使用风扇进行降温，但是又有点也会有缺点，缺点就是时间长了之后可能会堆积一些灰尘，需要进行清理。
At present, there are many ways to use air cooling and heat dissipation. Fans can be used for cooling, but there are some disadvantages. The disadvantage is that after a long time, some dust may accumulate and need to be cleaned.
使用水冷散热是在设备内部增加一个吸热的东西，通过水流来进行输送所产生的热量，从而达到冷却的目的，但是使用这种方式的成本相对较高一些。
The use of water cooling is to add a heat absorbing thing inside the equipment to transfer the heat generated through water flow, so as to achieve the purpose of cooling, but the cost of using this method is relatively high.
- 上一篇：好的数控开料机需要达到什么标准？
- 下一篇：四工序数控开料机的优点有哪些？
