联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
操作四工序开料机应该注意什么？
来源：http://www.jmycnc.com 时间：2021-10-08
注意一、操作数控开料机要注意。时刻注意设备的，这是整个工作顺利进行的前提和基础。人类作为设备的操作者，确实应该有足够的意识，使用正确的操作方法，切不可因为自己的粗心大意而把整个操作看得太重。
Note 1. Pay attention to safety when operating the CNC cutting machine. Always pay attention to the safety of equipment, which is the premise and foundation for the smooth progress of the whole work. As the operator of equipment, human beings should really have enough safety awareness and use correct operation methods. They must not pay too much attention to the whole operation because of their carelessness.
四工序开料机
Four process cutting machine
注意二、操作数控开料机时注意设备状况。在运行过程中，每一种设备都处于正常状态，但如果处于异常状态，肯定会表现出来。作为设备的操作人员，要对设备的整体状态进行判断，及时解决问题，否则会对设备造成较大的影响。
Note 2. Pay attention to the equipment condition when operating the NC cutting machine. During operation, each equipment is in normal state, but if it is in abnormal state, it will certainly show. As the operator of the equipment, judge the overall state of the equipment and solve the problems in time, otherwise it will have a great impact on the equipment.
注意三、在操作数控开料机的过程中，做好这些事情对每个操作人员来说都是非常重要的。当我们能够快速掌握相关方面时，所有的操作事项都会变得更加顺畅，整个过程中发生事故的几率也会降低。作为设备的操作者，在操作前尽量对各方面都有详细的了解和认识，否则整个操作过程无法更好的完成。
Note 3. It is very important for each operator to do these things well in the process of operating the NC cutting machine. When we can quickly grasp relevant aspects, all operation matters will become smoother and the probability of accidents in the whole process will be reduced. As the operator of the equipment, try to have a detailed understanding and understanding of all aspects before operation, otherwise the whole operation process cannot be completed better.
- 上一篇：影响五轴保丽龙雕刻机的因素是多少？
- 下一篇：数控开料机主轴使用以及维修保养方法!
