The precise work of the dual station of the four process woodworking engraving machine cutting machine is inseparable from the cooperation of various components. Next, Johnson CNC will popularize the three important factors of the use method and speed debugging of the tool setting instrument of the four process woodworking engraving machine cutting machine dual station engraving machine, so that you can better understand our products from the operation principle.

速度限制是将三轴的运动高速度加以规定。此功能在于确定雕刻机三轴在正负方向的速度范围。如果用户规定了高的速度限制，在执行文件加工和手动运动时，如果用户设定的速度超过了此限制，系统将以限制为高速度。按确定进入设置，按上和下键选择X,Y,Z三轴设置。按确定进入设置，全星号表示速度不作限制，如需要修改在光标处直接输入数值，按确定键确认更改，光标自动下移一行，正负方向设置完后退回上级菜单。如果不做更改，按停止键直退回上级菜单。

The speed limit specifies the high speed of the three-axis movement. This function is to determine the speed range of the three axes of the engraving machine in the positive and negative directions. If the user specifies a high speed limit, when executing file processing and manual movement, if the speed set by the user exceeds this limit, the system will limit it to high speed. Press OK to enter the setting, and press the up and down keys to select the X, y and Z axis setting. Press OK to enter the setting. The full asterisk indicates that the speed is not limited. If it needs to be modified, directly enter the value at the cursor, press OK to confirm the change, the cursor will automatically move down one line, and return to the superior menu after setting the positive and negative directions. If you do not make changes, press the stop key until you return to the previous menu.

对刀仪的使用大大的方便用户确定Z轴的工作零点位置，当雕刻机对刀完成后，系统将当前Z轴位置确认为Z轴工作坐标系零点，所以用户必 须将对刀仪块的厚度输入到参数中，在执行文件时系统自动将零点位置下移对刀仪块厚度的深度，这样才真 正确定了Z轴工作零点。

The use of the tool setting instrument greatly facilitates the user to determine the working zero position of the z-axis. After the tool setting of the engraving machine is completed, the system confirms the current z-axis position as the zero point of the z-axis working coordinate system, so the user must input the thickness of the tool setting instrument block into the parameters. When executing the file, the system automatically moves the zero position down to the depth of the thickness of the tool setting instrument block, In this way, the z-axis working zero point is really determined.

雕刻机必 须先有接口板同床体和对刀仪块的物理连接，对刀功能才能实现。雕刻机对刀操作使用的是组合键：菜单+触停，操作方法是：先按菜单不放手再按触停，然后同时松开，Z轴开始缓慢下降当刀尖接触到对刀仪块时，Z轴停止下降开始快速上升。

The engraving machine must have the physical connection between the interface board, the bed body and the tool setting instrument block before the tool setting function can be realized. The tool setting operation of the engraving machine uses the combination key: menu + Touch stop. The operation method is: first press the menu without letting go, then press touch stop, and then release it at the same time. The Z axis starts to decline slowly. When the tool tip contacts the tool setting instrument block, the Z axis stops falling and starts to rise rapidly.