联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
石材雕刻机容易出现什么故障？
来源：http://www.jmycnc.com 时间：2021-07-01
我们在使用石材雕刻机的时候，肯定会在使用的过程中出现一些故障，那么这个时候我们就要知道是机械哪里出现了问题，并要及时地进行解决。这样才能更好地进行使用。那么下面我们就来看一下吧。
When we use the stone carving machine, there will certainly be some failures in the process of use, so at this time we need to know where the mechanical problems occur, and to solve them in time. Only in this way can it be used better. Now let's take a look.
一、报警故障
1、 Alarm failure
超程报警，表示机器在运行过程中已达到端为位置，请按以下几个步骤逐步检查:
The over travel alarm indicates that the machine has reached the end position during operation. Please check step by step according to the following steps:
1、所设计的图形尺寸是否超出加工范围。
1. Whether the designed graphic size is beyond the processing range.
2、检查机器电机轴与丝杠连接线是否松动，若则，请上紧螺丝。
2. Check whether the connecting line between the motor shaft and the lead screw is loose. If so, tighten the screw.
3、机器与计算机是否正确接地。
3. Whether the machine and computer are properly grounded.
4、当前座标值是否超出软限位数值范围。
4. Whether the current coordinate value exceeds the range of soft limit value.
二、非报警故障
2、 Non alarm fault
1、电脑运行，机器不动，检查电脑控制卡与电器箱连接头是否松动，如果是，就要及时地进行解决，将其进行固定。
1. If the computer is running and the machine does not move, check whether the connector between the computer control card and the electrical box is loose. If it is, it is necessary to solve it in time and fix it.
2、机器在回机械原点时找不到信号，有可能是机械原点处接近开关失灵。
2. When the machine returns to the mechanical origin, the signal can not be found, which may be due to the failure of the proximity switch at the mechanical origin.
三、输出故障
3、 Output fault
1、不输出，请检查计算机和控制箱是否连接好。
1. No output, please check whether the computer and control box are connected well.
2、打开雕刻管理器的设置里空间是否已满，删除管理器内不用的文件。
2. Open the engraving manager settings to check whether the space is full, and delete the unused files in the manager.
3、信号线接线是否松动，检查各线路的链接是否正常。
3. Check whether the signal line wiring is loose and whether the links of each line are normal.
我们在大致的了解了石材雕刻机的故障之后，我们就要及时地进行故障的处理，保障其后期的正常运行，这样才能更好地将其投入到工作中。在石材雕刻机上面的选择也可以来华捷数控看一下，其在这方面还是做的不错的。
After we have a general understanding of the fault of stone carving machine, we have to deal with the fault in time to ensure its normal operation in the later stage, so as to better put it into work. In the stone engraving machine above the choice can also come to Huajie CNC look, its in this respect or do a good job.
- 上一篇：雕刻机的干扰问题怎么解决？
- 下一篇：石材雕刻机的这些知识你都清楚吗？
