The three process cutting machine has three foremen, who are respectively responsible for slotting, drilling, cutting and other processes. In the work engineering, the three foremen cooperate with each other, from loading to blanking, there is no need for manual intervention, and the degree of automation is very high. In addition, the driving motor and driver of the three process cutting machine are driven by high speed. The Y-axis of the double motor and the high-precision square rail rack lead screw drive make the cutting more precise and the error is very small. The size of each plate can be set in advance, which greatly saves the labor cost. In addition, the engraving machine can also carve panel furniture. It adopts linear square guide rail, double row and four row ball sliders, which runs smoothly. With the imported ball screw, it has high precision, so that it can cut and carve effectively. The following is a brief introduction to the three process opener

现在在厂里主要从事厂里板式家具加工车间的操作与管理工作，厂子以前是从事古风家具生产的，后来随着板式家具的兴起才开始做这一块。一开始厂里的板式家具生产采用的是以人工为主的加工方式，但是慢慢的就发现了这种声场方式的弊端。

Now I am mainly engaged in the operation and management of the panel furniture processing workshop in the factory. The factory used to be engaged in the production of antique furniture, and later began to do this with the rise of panel furniture. At the beginning, the production of panel furniture in the factory used the manual processing method, but slowly found the disadvantages of this sound field method.

板式家具大多数走都是定制生产，就拿衣柜为例，每个顾客要求的都不一样，尺寸、规格都不同，这就需要大量的人力去测算、测量，然后再开始开料、组合。因此十分的耗费人力，使人力成本大幅提升，压缩企业利润。

Most of the panel furniture is custom-made. Take the wardrobe as an example. Each customer has different requirements, sizes and specifications, which requires a lot of manpower to calculate and measure, and then start cutting and combining. Therefore, it costs a lot of manpower, greatly increases the cost of manpower, and compresses the profits of enterprises.

面对这种情况，厂里决定将原有以人工为主的生产方式，换成以机械化为主的生产方式。大家都知道板式家具的生产过程中需要大量的测算，每一步骤都要的很细的环节，人工都需要很长的时间，机械能否完成该这些复杂的工作，因此厂里的工人们都持着怀疑的态度。

In the face of this situation, the factory decided to replace the original manual production mode with mechanized production mode. As we all know, the production process of panel furniture needs a lot of calculation, every step needs a very detailed link, and labor takes a long time. Whether the machinery can complete these complex work, so the workers in the factory are skeptical.

就这样，厂里从济南购买的两台三工序开料机在工人们的怀疑中投入了生产。很快他们就发现这台三工序开料机确实能够担任厂里板式家具生产的重任，因为它配备有的CNC数控加工系统，加工过程完全由电脑控制，板式家具加工的每个细节只需要设定好基数，便能进行裁切，再由人工进行组合即可，大大提高了厂里板式家具的生产效率。

In this way, the factory from Jinan to buy two sets of three process opener in the suspicion of workers put into production. Soon they found that this three process cutting machine can really take on the important task of panel furniture production in the factory, because it is equipped with CNC machining center system, and the processing process is completely controlled by computer. Every detail of panel furniture processing only needs to set a good base, then it can be cut, and then it can be combined manually, which greatly improves the production efficiency of panel furniture in the factory .