联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
为什么有人会选择四工序开料机？
来源：http://www.jmycnc.com 时间：2021-03-16
这四道工序共有四个主轴，分别用于切割、开槽、钻孔和制作橱柜。它可以在8小时内处理40块木板，还可以完成一些简单的门板形状。这是开孔机中一种相对经济的装置。
There are four spindles in the four processes, which are used for cutting, slotting, drilling and cabinet making. It can handle 40 boards in 8 hours a day, and it can also complete some simple door panel shapes. This is a relatively economical device in the opening machine.
四个过程就是四个过程。就目前板式家具而言，开板过程中必须使用4把刀，每把刀代表一个工艺。四个刀，两个用于冲孔，一个用来做后板凹槽，另一个用来切割毛坯。每把刀都固定在一个主轴上，主轴(刀具)可以自由切换。在执行加工指令之前，系统已经设定了每个刀具的用途。
Four processes are four processes. As far as the current panel furniture is concerned, four knives must be used in the process of cutting, and each knife represents a process. Four knives, two for punching, one for back plate groove, and the other for cutting blank. Each tool is fixed on a spindle, and the spindle (tool) can be switched freely. Before executing the machining instruction, the system has set the purpose of each tool.
因此，在加工过程中，需要使用哪种刀具，主轴可以自由切换，非常省力，省去了手动换刀的繁琐过程。四道工序切割机具有一键对刀功能，可自动对刀四道，节省人力对刀时间。
Therefore, in the process of processing, which kind of tool needs to be used, the spindle can be freely switched, which is very labor-saving and saves the tedious process of manual tool change. Four process cutting machine has one key tool setting function, which can automatically set the tool four times, saving manpower tool setting time.
四个主轴的功率是多少?河南巨无霸数控设备有限公司四工序放卷机主轴统一为风冷6KW大功率主轴，切削力强。不会出现雕刻机不动或雕刻困难的现象。无论是钻孔、开槽还是切割都可以用一把刀完成。
How much is the power of the four spindles? Henan giant CNC Equipment Co., Ltd. four process unwinder spindles are air-cooled 6kW high-power spindles with strong cutting force. There will be no engraving machine does not move or carving difficult phenomenon. Whether drilling, slotting or cutting can be done with a knife.
除了板式家具外，四道工序的开门机也可以用作柜门。柜门简单只需3刀，复杂只需4刀。总之，四道工序退卷机可以轻松处理门和柜子(板式家具)
In addition to panel furniture, the door opener of four processes can also be used as cabinet door. Simple cabinet door only need 3 knives, complex only need 4 knives. All in all, the four process unwinder can handle doors and cabinets (panel furniture) easily
- 上一篇：五轴保丽龙雕刻机的性能特点是什么？
- 下一篇：保丽龙泡沫雕刻机的需求量越来越大
