一：安装 NCStudio 软件。将 NCStudio 系统安装光盘放入光驱。 双击“我的电脑”，打开后再双击光驱盘符。待光盘打开后，双击运行SETUP.EXE安装程序。 单击“下一步”，系统提示选择安装的目的地位置。单击“下一步”，系统提示选择程序文件夹。单击“下一步”，系统提示开始复制文件。单击下一步，系统自动完成文件复制过程。并且提示立即关闭计算机。请选择立即关闭计算机。在计算机关闭后，开始安装运动控制卡。

1： Install the ncstudio software. Put the installation CD of ncstudio system into the CD-ROM drive. Double click my computer, open it, and then double-click the drive letter. After the CD is opened, double-click to run SETUP.EXE erection sequence. Click next, and you will be prompted to select the installation destination. Click Next and you will be prompted to select the program folder. Click Next and you will be prompted to start copying files. Click Next and the system will automatically complete the file copy process. And prompt to shut down the computer immediately. Please choose to turn off the computer now. After the computer is turned off, start installing the motion control card.、

二：安装NCStudio 运动控制卡。关闭主机电源，打开计算机的机箱盖，将运动控制卡插入插口形式匹配的扩展槽内。安装运动控制卡时，用手轻按运动控制卡两侧，确保运动控制卡稳固插入槽中，与计算机底板接触良好、可靠，而且不存在摇晃的情况，然后旋紧板卡的紧固螺钉，盖好机箱盖。这样运动控制卡的安装就完成了。

2： Install ncstudio motion control card. Turn off the power of the host computer, open the computer case cover, and insert the motion control card into the expansion slot matched with the socket. When installing the motion control card, gently press the two sides of the motion control card to ensure that the motion control card is firmly inserted into the slot, has good and reliable contact with the computer base plate, and does not shake. Then tighten the fastening screw of the card, and finally cover the chassis cover. In this way, the installation of the motion control card is completed.

三：重新启动计算机。安装好运动控制卡，请重新启动计算机。在您重新启动计算机后， Windows 操作系统就会报告找到新硬件，并自动配置系统，很快这个过程就会结束。 这时整个 NCStudio 软件和运动控制卡的安装完成。在桌面上和开始->程序菜单中都有启动 NCStudio 软件的快捷方式。此时通过相应的快捷方式即可启动 NCStudio软件。

3： Restart the computer. After installing the motion control card, please restart the computer. After you restart your computer, the windows operating system will report that new hardware has been found and the system will be automatically configured, and the process will soon be over. At this time, the installation of ncstudio software and motion control card is completed. There is a shortcut to start the ncstudio software on the desktop and in the start program menu. At this time, you can start ncstudio software through the corresponding shortcut.