联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
石材雕刻机主轴怎么挑选?
来源：http://www.jmycnc.com 时间：2021-01-27
主轴对于石材雕刻机来说就是重要的组成部件之一。主轴的好坏直接影响墨源雕刻机的加工速度和精度，以下是购买石材雕刻机时挑选主轴部分的几点建议。
Spindle is one of the important components of stone carving machine. The quality of the main shaft directly affects the processing speed and accuracy of the Moyuan engraving machine. Here are some suggestions for selecting the main shaft when purchasing the stone engraving machine.
石材雕刻机主轴怎么挑选??
How to choose the main shaft of stone carving machine?
1.石材雕刻机主轴电机是否采用高精度轴承，如果不采用高精度轴承，表现是主轴电机长时间高速旋转后过热，从而影响主轴电机的使用寿命。
1. Whether the spindle motor of stone carving machine adopts high-precision bearing or not. If not, the spindle motor will overheat after long-time high-speed rotation, which will affect the service life of the spindle motor.
2.如果追求石材雕刻机的加工效率，加工时既要速度快，同时吃刀量又大，如加工实木材料等，需要3KW以上大功率的主轴电机。
2. If we pursue the processing efficiency of stone carving machine, we need high speed and large amount of cutting at the same time, such as processing solid wood materials, we need more than 3KW high-power spindle motor.
3.看石材雕刻机主轴径向是否受力。主要是看能否高速切割质地较硬的材料。有些主轴只会在很低的速度下切割较硬的材料，在高速下切割硬质材料，主轴就会严重丢转。这种雕刻机在一段时间后影响主轴精度，甚出现故障。
3. Check whether the main shaft of stone carving machine is under radial force. Mainly to see whether high-speed cutting of hard materials. Some spindles can only cut hard materials at a very low speed. When cutting hard materials at a high speed, the spindles will lose rotation seriously. After a period of time, this kind of engraving machine will affect the accuracy of the spindle, and even break down.
4.听雕刻机主轴在不同速度旋转的声音是否均匀没有噪杂声，尤其是高速旋转的声音是否均匀和谐。
4. Listen to whether the sound of the engraving machine spindle rotating at different speeds is even and without noise, especially whether the sound of high-speed rotation is even and harmonious.
- 上一篇：为什么四工序开料机能够成为爆款？
- 下一篇：玉石雕刻机过程七大流程都有哪些呢？
