联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
业内资讯
雕刻机想要好用的我们需要做哪些事情？
来源：http://www.jmycnc.com 时间：2020-11-18
雕刻机是我们经常使用的雕刻设备，由于一些原因，我们有时候会长时间使用雕刻机，长久以来，雕刻机就会出现一些故障，变得不再好用。那么，要想雕刻机好用必须做的事是什么呢?下面给您介绍一下
Engraving machine is the engraving equipment we often use. For some reasons, we sometimes use the engraving machine for a long time. For a long time, the engraving machine will have some faults and become no longer easy to use. So, if you want to carve machine easy to use, what must be done? Let's introduce it to you
1、稳定电压：保持电压的稳定，是保护机器电器件的要素，一般雕刻机有漏电保护装置，热敏电阻等保护措施，电压不稳或者温度过高，机器都会报警。
1. Stable voltage: to keep the voltage stable is the first element to protect the electrical parts of the machine. Generally, engraving machines have leakage protection devices, thermistor and other protective measures. If the voltage is unstable or the temperature is too high, the machine will alarm.
2、强化润滑：导轨、丝杠等配件是运行过程中的轨道，定期注入润滑油有助于运行轨道运行稳定、的作用。
2. Strengthen lubrication: guide rail, lead screw and other accessories are the track in the process of operation. Regular injection of lubricating oil is conducive to the stable and safe operation of the running track.
3、冷却水温：石材雕刻切屑力大，主轴、刀具的冷却程度取决于水温，良好的降温效果，有助于主轴和刀具的使用寿命，夏季防止水温过高，冬季警惕水结冰。
3. Cooling water temperature: stone carving chip force is large, the cooling degree of spindle and cutting tool depends on the water temperature. Good cooling effect is helpful to the service life of spindle and cutting tool. The water temperature should be prevented too high in summer and water freezing in winter.
4、选择好刀：石材雕刻耗材主要是刀具，好马配好鞍，选择一把好刀，可以持续长时间使用，如果经常更换刀具，对刀夹、主轴都会有损害，机器经常启动、停止工作不连贯，对机器也会有影响。
4. Choose a good knife: the stone carving consumables are mainly tools. A good horse with a good saddle and a good knife can be used for a long time. If the tool is often replaced, the tool holder and spindle will be damaged, and the machine will start and stop incoherently, which will also affect the machine.
5、减轻负荷：机器是加工材料的不是储放平台，使用过程中尽量避免机器横梁上堆放过重的材料，对机器的爱护，是您长期使用的保证。
5. Reduce the load: the machine is the processing material, not the storage platform, in the process of use, try to avoid stacking too heavy materials on the machine beam, the care of the machine is your guarantee for long-term use.
6、检查和清洁：定期或长时间强度工作过后，保持机器的洁净，避免淤泥堆积，对机器做个检查，更好的延长机器寿命。要想雕刻机好用必须做的六件事
6. Inspection and cleaning: after regular or long-term intensive work, keep the machine clean, avoid sludge accumulation, and make an inspection on the machine, so as to better extend the service life of the machine. Six things you have to do to make the engraving machine work well
- 上一篇：石材雕刻机可用于哪些材料的雕刻工作呢？
- 下一篇：双工序开料机的配置都有哪些？
