Work efficiency is equal to the improvement of production efficiency, which is very necessary for the development and growth of enterprises. Therefore, improving the working efficiency of four axis styrofoam engraving machine is the embodiment of improving work efficiency. However, there are many ways to improve the working efficiency of the four axis styrofoam engraving machine. The manufacturer of the four axis styrofoam engraving machine is introduced in detail.

根据不同的材料确定不同的吃刀量。由于不同材料的刀具都会有一个吃刀量，我们用四轴保丽龙雕刻机进行加工的时候，尽量不要用刀具的吃刀量进行加工，长时间加工的话，刀具损坏的比较快。而且在吃刀量下进行加工时速度还提不上来，速度一快就很可能造成断刀。

According to different materials to determine the different amount of knife. Since the cutting tool of different materials will have a cutting capacity, when we use the four axis styrofoam engraving machine for processing, we should try not to use the cutting capacity of the cutting tool for processing. If processing for a long time, the tool will be damaged faster. In addition, the cutting speed can not be raised when processing under the cutting amount, and the cutter may be broken if the speed is fast.

所以我们就不如把下刀量设置成量的2/3,这样刀具寿命也会大大增长，加工速度还可以提高很多；如此一来既可以节省刀具成本，也可以提高加工效率。根据雕刻材料的粗细确定下刀深浅。我们要根据实际情况行粗加工，然后进行精加工。当在粗加工时，尽可能切除全部余量，节省精加工时间；还可以采用加工性能更好的刀具材料。

Therefore, we might as well set the cutting amount to 2 / 3 of the amount. In this way, the tool life will be greatly increased, and the processing speed can be improved a lot. In this way, the tool cost can be saved and the processing efficiency can be improved. According to the thickness of the carving material to determine the depth of the knife. We should carry out rough machining first and then finish machining according to the actual situation. In rough machining, all the allowance should be cut off as much as possible to save the finishing time; the tool material with better machining performance can also be used.

四轴保丽龙雕刻机的性能不仅体现在机器的硬件配置，还需要我们长期的积累加工经验，来提高雕刻机的加工效率。总之，不管是四轴保丽龙雕刻机也好，还是石材雕刻机也罢，主要的一点就是根据雕刻材料的硬度和雕刻刀具的性能来确定一个合理的切削用量，这样才能发挥雕刻机的优点，达到预期的雕刻效果。这就是提高四轴保丽龙雕刻机工作效率的小技巧。

The performance of the four axis styrofoam engraving machine is not only reflected in the hardware configuration of the machine, but also requires our long-term accumulated processing experience to improve the processing efficiency of the engraving machine. In short, whether it's a four axis styrofoam engraving machine or a stone carving machine, the main point is to determine a reasonable cutting amount according to the hardness of the carving material and the performance of the carving tool, so as to give full play to the advantages of the engraving machine and achieve the desired carving effect. This is to improve the efficiency of four axis styrofoam engraving machine skills.