1. 在保丽龙雕刻机开机之前确定机床与计算机所有连接正常，然后打开机床电源和计算机电源。在系统启动完毕后，进入NCStudio 数控系统。

1. Before starting the styrofoam engraving machine, make sure that all connections between the machine tool and the computer are normal, and then turn on the power supply of the machine tool and the computer. After the system is started, enter the NC studio NC system.

2。打开控制系统以后选择"回机械原点"菜单。机床将自动回到机械原点，并且校正系统坐标系统。在某些情形下，如上次正常停机后，重新开机并继续上次的操作，用户不必执行机械复位操作。NCStudio 系统在正常退出时，会保存当前坐标信息。另外，如果用户确认当前位置正确，也可以不执行此操作。

 

2。 After opening the control system, select the "return to mechanical origin" menu. The machine will automatically return to the mechanical origin and correct the system coordinate system. In some cases, for example, after the last normal shutdown, the user does not have to perform the mechanical reset operation after restarting and continuing the last operation. Ncstudio system will save the current coordinate information when it exits normally. In addition, if the user confirms that the current position is correct, this operation can not be performed.

3. 在加工之前，用户一般要载入需要的加工程序，否则，一些与自动加工有关的功能是无效的。选择"打开(F)|打开(O)…"菜单，将弹出Windows标准的文件操作对话框，可以从中选择要打开文件所在的驱动器、路径以及文件名。单击"打开"按钮后，加工程序就载入系统。

3. Before processing, the user generally needs to load the required processing program, otherwise, some functions related to automatic processing are invalid. Select open | open "Menu, the windows standard file operation dialog box will pop up, from which you can select the drive, path and file name where you want to open the file. After clicking the "open" button, the processing program is loaded into the system.

4. 确定工件原点，把保丽龙雕刻机的X、Y两个方向手动走到工件上的希望的原点位置，选择"把当前点设为工件原点"菜单，或者在坐标窗口把当前位置的坐标值清零，这样在执行加工程序时就以当前位置为起始点进行加工。

4. Determine the origin of the workpiece, manually move the X and Y directions of the styrofoam engraving machine to the desired origin position on the workpiece, select the menu of "set the current point as the origin of the workpiece", or clear the coordinate value of the current position in the coordinate window, so that the processing can be carried out with the current position as the starting point when the processing program is executed.

相关标签：保丽龙雕刻机