联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
五轴保丽龙雕刻机的主轴该如何选择？
来源：http://www.jmycnc.com 时间：2020-09-21
众所周知，五轴保丽龙雕刻机一般都配备了高性能主轴来发挥其作用。主轴可用于高速雕刻，钻孔和铣削，钻孔等。当五轴保丽龙雕刻机的主轴高速旋转时，会产生大量热量。
As we all know, five axis styrofoam engraving machines are generally equipped with high-performance spindle to play its role. Spindle can be used for high speed engraving, drilling and milling, drilling, etc. When the spindle of five axis styrofoam engraving machine rotates at high speed, a lot of heat will be produced.
如果热量没有及时冷却，会对主轴的使用寿命产生很大影响，甚会烧坏主轴。五轴保丽龙雕刻机的主轴有两种主要的冷却方法，包括水冷和空气冷却。但是主轴需要什么样的冷却方法？作为保丽龙雕刻机行业的行家，墨源提出以下建议。
If the heat is not cooled in time, it will have a great impact on the service life of the spindle, and even burn out the spindle. There are two main cooling methods for the main shaft of five axis styrofoam engraving machine, including water cooling and air cooling. But what kind of cooling method is needed for the spindle? As an expert in the styrofoam carving machine industry, Mo yuan puts forward the following suggestions.
五轴保丽龙雕刻机主轴的选择
Selection of main shaft of five axis styrofoam engraving machine
使用水冷主轴或风冷主轴更好吗？许多需要购买五轴保丽龙雕刻机的客户将面临这个问题。为了解决这个问题，墨源工程师列出了水冷主轴和雕刻机的空气冷却主轴之间的区别。也许选择有帮助。
Is it better to use water-cooled spindle or air-cooled spindle? Many customers who need to buy a five axis styrofoam engraving machine will face this problem. To solve this problem, the ink source engineer listed the difference between the water-cooled spindle and the air-cooled spindle of engraving machine. Maybe the choice helps.
1.五轴保丽龙雕刻机的冷却效果。水冷方法采用水循环冷却主轴。水循环后主轴温度保证在40度以下，其冷却效果远优于水冷方式。
1. Cooling effect of five axis styrofoam engraving machine. The main shaft is cooled by water circulation. After water circulation, the temperature of the main shaft is kept below 40 ℃, and its cooling effect is far better than that of water cooling.
2.五轴保丽龙雕刻机的噪音。水冷主轴电机基本上没有噪音，与水冷相比，风冷主轴电机噪音较大。
2. Noise of five axis styrofoam engraving machine. The water-cooled spindle motor has no noise basically. Compared with water-cooled spindle motor, the noise of air-cooled spindle motor is larger.
3.五轴保丽龙雕刻机的使用寿命。水冷主轴可以通过人为因素延长使用寿命，如换水或使用工业水冷却器，因此其使用寿命比风冷主轴长。
3. Service life of five axis styrofoam engraving machine. The service life of water-cooled spindle can be prolonged by human factors, such as changing water or using industrial water cooler, so its service life is longer than that of air-cooled spindle.
4.五轴保丽龙雕刻机的准确性。水冷主轴的轴向和径向跳动基本上低于0.003 mm，其精度高于空冷主轴。
4. Accuracy of five axis styrofoam engraving machine. The axial and radial runout of the water-cooled spindle is basically less than 0.003 mm, and its accuracy is higher than that of the air-cooled spindle.
5.五轴保丽龙雕刻机易于使用。由于水冷却主轴需要连接到水泵，因此需要一个水桶来保持水。它需要连接到水管。特别是在北方的寒冷冬季，水管容易结冰，这对于寒冷的冬天的顾客来说可能更麻烦。此时，风冷主轴更合适。
5. Five axis styrofoam engraving machine is easy to use. Since the water cooling spindle needs to be connected to the water pump, a bucket is needed to hold the water. It needs to be connected to a water pipe. Especially in the cold winter in the north, water pipes are easy to freeze, which may be more troublesome for customers in cold winter. At this time, the air-cooled spindle is more suitable.
相关标签：五轴保丽龙雕刻机
相关标签：五轴保丽龙雕刻机
- 上一篇：五轴保丽龙雕刻机选择要点是什么？
- 下一篇：玉石雕刻机加工时的注意事项是什么?
