联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
木工油气润滑和油雾润滑的不同点！
来源：http://www.jmycnc.com 时间：2019-06-10
木工油气润滑和油雾润滑的不同点:
The difference between oil-air lubrication and oil mist lubrication in woodworking centers:
1、在木工加工，使用油脂和润滑油循环润滑会产生异常发热部位。
1. In woodworking processing centers, the use of grease and lubricant circulation lubrication will produce abnormal heating parts.
2、像主轴一样，需要高度清洁、封闭部件的高速轴承。
2. Like the spindle, high-speed bearings with highly clean and closed components are required.
木工润滑系统的特点
Characteristics of Lubrication System in Woodworking Center
1、，无污染。因为没有石油和雾，周围的环境没有受到污染
1. Environmental protection, no pollution. Because there is no oil and fog, the surrounding environment is not polluted.
2. 准确的石油供应。通过增加调节阀，油可根据不同需要输送到主轴、丝杠等润滑点;
2. Accurate oil supply. By adding a regulating valve, oil can be transported to lubrication points such as spindle and screw according to different needs.
3、不存在高粘度润滑油雾化问题;
3. There is no atomization problem of high viscosity lubricating oil.
4. 自动检测和监控。可检测润滑油是否正常，如润滑不佳，可报警停机，避免设备运行异常。
4. Automatic detection and monitoring. It can detect whether the lubricating oil is normal or not. If the lubrication is not good, it can alarm the shutdown and avoid abnormal operation of the equipment.
特别是对滚动轴承的主轴，采用适当的风冷效果，可以降低轴承的工作温度，从而延长主轴的使用寿命
Especially for the spindle of rolling bearing, proper air cooling effect can reduce the working temperature of the bearing and prolong the service life of the spindle.
- 上一篇：木工加工的影响因素有哪些？
- 下一篇：激光雕刻机激光头安装后的注意事项！
