联系我们
18560023440
王经理：18560023440
地址：山东省德州市齐河县经济开发区齐众大道7号-2车间
新闻资讯
石材雕刻机的断刀问题怎么解决？
来源：http://www.jmycnc.com 时间：2021-05-31
关于石材雕刻机在使用的时候，会时不时的出现断刀的问题，这时候我们就要对出现断刀的原因进行解决，这样才能及时的止损，保障设备的正常运行。那么下面我们就来进行相关的了解吧。
When using the stone carving machine, there will be the problem of broken knife from time to time. At this time, we need to solve the cause of broken knife, so as to stop loss in time and ensure the normal operation of the equipment. Now let's have a related understanding.
1、考虑一下原材料是否有残渣或者的强度是否过变大。长期手工雕刻高韧性的原材料，数控刀片的损坏和断刃是难以避免的。像手工雕刻红木，假如速率调的太大，那麼刀断的必定的。
1. Consider whether there is residue in the raw material or whether the strength of the material is too high. Long term manual carving of high toughness raw materials, CNC blade damage and broken edge is inevitable. Like hand carved mahogany, if the speed adjustment is too large, then the knife must be broken.
2、石材雕刻机在长期工作时沒有拆换数控刀片，造成数控刀片自身在强度、抗压强度、和锋利度上受到非常大影响，可以常常查验数控刀片是不是损坏了，如果发现损坏的程度比较大的话，那么我们就需要及时地进行更换。
2. Stone carving machine in the long-term work did not replace the numerical control blade, resulting in the numerical control blade itself in the strength, compressive strength, and sharpness are greatly affected, you can often check whether the numerical control blade is damaged, if the degree of damage is relatively large, then we need to replace it in time.
3、石材雕刻机数控车床是不是合适生产加工这类原材料，石材雕刻机数控车床放置是不是在水准表面，如果没有准确的进行放置的话，也会导致刀 具的断裂。
3. Whether the CNC lathe of stone carving machine is suitable for the production and processing of such raw materials, whether the CNC lathe of stone carving machine is placed on the level surface, if it is not placed accurately, it will also lead to the fracture of the cutting tool.
4、伺服电机的转速比是不是过低，伺服电机转速比过低，每齿每转吃走刀的量就增加，那样切削速度就增加，就会造成刀断，如果出现这种情况，就要及时地进行调解。
4. Is the speed ratio of the servo motor too low? If the speed ratio of the servo motor is too low, the amount of feed per tooth per revolution will increase, so the cutting speed will increase, which will cause the tool to break. If this happens, it is necessary to mediate in time.
5、数控刀片和夹头顶是不是有尘土，筒夹里的尘土一定得清 除整洁，不然那些的数控刀片全是非常容易断的，上刀幅度是不是过大。筒夹和螺帽是否完好无损。这些都是需要我们考虑到的。
5. Whether there is dust on the NC blade and the top of the clip, the dust in the collet must be cleaned up, otherwise the NC blades are all very easy to break, and whether the loading range is too large. Whether the collet and nut are intact. All these need to be taken into consideration.
以上就是对于石材雕刻机出现问题，我们应该怎样应对。如果还有不明白的地方，可以来华捷数控进行相关的咨询和了解。
The above is for stone carving machine problems, we should how to deal with. If you still don't understand, you can come to Huajie CNC for relevant consultation and understanding.
- 上一篇：雕刻机使用过程出现错位故障怎么办
- 下一篇：石材雕刻机做立体效果怎么样？
